A clipped-head framing nailer for 50 to 90 mm nails, built for wall frames, roof trusses, decking and fencing. Switch between sequential and bump firing, set the depth without tools, and hang it on a joist with the rafter hook between shots.
A 1/2" air impact wrench with a twin-hammer mechanism for wheel nuts, suspension work and heavy bolting. It gives high, smooth torque with less kickback, and three power settings with forward and reverse let you match the force to the job.
A 3 hp belt-drive workshop compressor with a 100 litre tank and a slow-running cast-iron pump that delivers 340 L/min. Built for daily trade use, it runs cooler and quieter than direct-drive models and lasts for years with simple oil changes.
A light 2 hp direct-drive compressor with a 24 litre tank, for nail guns, tyre inflation and blow-down. The oil-free pump needs no maintenance and puts no oil in the air, and it plugs into a standard socket, so it goes wherever the job does.
An HVLP gravity-feed spray gun with a 1.4 mm nozzle and a 600 ml cup, for primers, top coats and clear coats. It puts more paint on the panel and less in the air, with separate fan, fluid and air controls and a stainless needle and nozzle.
A petrol-driven air compressor on puncture-proof wheels, for building sites, farms and remote jobs with no power. The 6.5 hp engine and 70 litre tank keep nail guns and impact wrenches going, and idle control drops the engine speed when the tank is full to save fuel.
A flexible 8 mm polyurethane air hose with brass quick couplers fitted at both ends, rated to 15 bar. It stays supple in cold weather, resists kinks and is light to drag around the workshop or site, so it is ready to use straight from the pack.
A 10 hp rotary screw compressor with a built-in refrigerated dryer and a 270 litre receiver, delivering 1000 L/min of dry air all day. Built for production lines and panel shops, it runs at 100% duty cycle and is installed and commissioned by us.
A 3/4" air impact wrench with a twin-hammer mechanism for wheel nuts, suspension work and heavy bolting. It gives high, smooth torque with less kickback, and three power settings with forward and reverse let you match the force to the job.
A 5.5 hp belt-drive workshop compressor with a 200 litre tank and a slow-running cast-iron pump that delivers 620 L/min. Built for daily trade use, it runs cooler and quieter than direct-drive models and lasts for years with simple oil changes.
A light 2 hp direct-drive compressor with a 50 litre tank, for nail guns, tyre inflation and blow-down. The oil-free pump needs no maintenance and puts no oil in the air, and it plugs into a standard socket, so it goes wherever the job does.
An HVLP gravity-feed spray gun with a 1.7 mm nozzle and a 600 ml cup, for primers, top coats and clear coats. It puts more paint on the panel and less in the air, with separate fan, fluid and air controls and a stainless needle and nozzle.
A flexible 8 mm polyurethane air hose with brass quick couplers fitted at both ends, rated to 15 bar. It stays supple in cold weather, resists kinks and is light to drag around the workshop or site, so it is ready to use straight from the pack.
A 20 hp rotary screw compressor with a built-in refrigerated dryer and a 500 litre receiver, delivering 2100 L/min of dry air all day. Built for production lines and panel shops, it runs at 100% duty cycle and is installed and commissioned by us.
A 10 hp belt-drive workshop compressor with a 300 litre tank and a slow-running cast-iron pump that delivers 1100 L/min. Built for daily trade use, it runs cooler and quieter than direct-drive models and lasts for years with simple oil changes.
A flexible 10 mm polyurethane air hose with brass quick couplers fitted at both ends, rated to 15 bar. It stays supple in cold weather, resists kinks and is light to drag around the workshop or site, so it is ready to use straight from the pack.
A flexible 10 mm polyurethane air hose with brass quick couplers fitted at both ends, rated to 15 bar. It stays supple in cold weather, resists kinks and is light to drag around the workshop or site, so it is ready to use straight from the pack.