Product overview
The Galecore polyurethane air hose links your compressor to air tools with less weight and fewer kinks than a rubber or PVC hose. It comes fitted with a brass quick coupler at one end and a matching plug at the other, so you can use it straight away or join two hoses together.
Polyurethane stays flexible in winter, so the hose lies flat and coils easily on cold mornings. It is also tough against abrasion when dragged over concrete.
The hose is recoil-free, so it lies flat instead of springing back into coils. That makes it easier to drag across the floor without catching on wheels and bench legs.
Key features
- Rated to 15 bar
- Brass quick couplers fitted
- Kink resistant
Where to use it
It suits most air tools used in workshops, on site and in vans.
- Nailers, staplers and blow guns
- Impact wrenches and air ratchets
- Spray guns and tyre inflators
- Mobile service vans and tyre fitters
- Extending a fixed workshop air line
Choosing the bore and length
The bore controls how much air reaches the tool. Long, narrow hoses lose pressure, which shows as weak tools. Pick the bore first, then the shortest length that reaches your work.
- 8 mm bore: nailers, blow guns, inflators and 1/2 inch impact wrenches on short runs
- 10 mm bore: impact wrenches, sanders and spray guns
- 10 m: bench work and single bays
- 20 m: larger workshops, sites and around vehicles
Design and construction
The hose is made from ether-based polyurethane, which resists water, compressor oil mist and UV light. Spring strain reliefs at each end stop the hose kinking where it meets the fittings, which is where most hoses fail.
The brass coupler and plug use the standard UK workshop profile, so they fit most compressors and tools already in use. The bright blue colour makes the hose easy to see on the floor and reduces trip risks.
Every hose is pressure tested before packing, and the fittings are held by crimped ferrules so they do not pull off under load.
Use and care
Disconnect the hose from the supply before changing tools, and never point a live hose at a person. Avoid running it over sharp edges or under vehicle wheels. Coil it loosely or keep it on a reel when not in use, away from heat sources and welding spatter.
Check the couplers regularly for leaks and wear, and replace damaged hose rather than taping it. Small leaks at couplers waste more air than most people expect.
A hose reel keeps the hose off the floor, protects it from vehicles and dropped tools, and makes it quicker to put away at the end of the day.
Packaging and ordering
Each hose is supplied coiled and bagged with a label showing the size and length. Workshops can order several lengths in one go with quick order, and tier prices apply on larger quantities.
Hoses are light and ship by parcel courier, so they can be added to any order.
Demo product: invented for the Cartenvo B2B demo store.