A 13-piece set of fully ground HSS drill bits in 0.5 mm steps, packed in a metal case with a size-marked rack. It covers clearance and pilot holes in steel, aluminium, plastics and timber, and keeps every size in its place in the van or workshop.
Fully ground 2 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
SDS-plus masonry bit, 6 × 160 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
A 19-piece set of fully ground HSS drill bits in 0.5 mm steps, packed in a metal case with a size-marked rack. It covers clearance and pilot holes in steel, aluminium, plastics and timber, and keeps every size in its place in the van or workshop.
Fully ground 3 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
SDS-plus masonry bit, 8 × 160 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
A 25-piece set of fully ground HSS drill bits in 0.5 mm steps, packed in a metal case with a size-marked rack. It covers clearance and pilot holes in steel, aluminium, plastics and timber, and keeps every size in its place in the van or workshop.
Fully ground 4 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
SDS-plus masonry bit, 10 × 210 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
Fully ground 5 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
SDS-plus masonry bit, 12 × 210 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
Fully ground 6 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
SDS-plus masonry bit, 14 × 260 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
Fully ground 8 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
Fully ground 10 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
Fully ground 12 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.