Boltmark

Bolts, nuts and washers to ISO and DIN sizes.

Sort by
Display per page

49 products found.

Picture of Flat washer M5, form A

Flat washer M5, form A

SKU: BM-FWM5
Boltmark M5 flat washer, form A, in bright zinc plated steel. It spreads the load under bolt heads and nuts, protects painted and soft surfaces and bridges slightly oversized holes. Made to ISO 7089 dimensions and packed in 200s, so there is always one to hand for every bolt.

Sold in washers. Quantities round up to full packs.

Your price From $0.42
Picture of Hex bolt M6 × 20 mm, zinc plated

Hex bolt M6 × 20 mm, zinc plated

SKU: BM-HBM620
Boltmark M6 × 20 mm hex head bolt in property class 8.8 steel with a bright zinc finish. A general-purpose structural bolt for steelwork, machinery guards, brackets and racking, sold in packs of 50 with consistent threads that run on cleanly every time.

Sold in bolts. Quantities round up to full packs.

Your price From $0.42
Picture of Hex bolt M6 × 25 mm, stainless A2

Hex bolt M6 × 25 mm, stainless A2

SKU: BM-HBSM625
Boltmark M6 × 25 mm hex head bolt in A2 stainless steel. It will not rust in rain, damp or wash-down areas, so it suits outdoor brackets, handrails, signage and food or drink plant. Supplied in packs of 25, with a clean natural finish that needs no painting.

Sold in bolts. Quantities round up to full packs.

Your price From $0.42
Picture of Hex nut M5, zinc plated

Hex nut M5, zinc plated

SKU: BM-HNM5
Boltmark M5 full hex nut in grade 8 steel with a bright zinc finish. It matches grade 8.8 bolts and studding for structural and general engineering joints. Packed in 100s with clean, accurate threads that run on by hand and won't strip at full torque.

Sold in nuts. Quantities round up to full packs.

Your price From $0.42
Picture of Nyloc nut M6, zinc plated

Nyloc nut M6, zinc plated

SKU: BM-NNM6
Boltmark M6 nyloc nut with a nylon locking ring that grips the bolt thread and resists loosening under vibration. Grade 8 steel with a bright zinc finish, it suits machinery, trailers and anything that shakes. Packs of 100 for workshop and van stock.

Sold in nuts. Quantities round up to full packs.

Your price From $0.42
Picture of Spring washer M6

Spring washer M6

SKU: BM-SWM6
Boltmark M6 spring washer with a square section, made from hardened spring steel and zinc plated. It adds spring tension under a nut or bolt head to help keep joints tight under light vibration. Packed in 200s for workshops, maintenance stores and van stock.

Sold in washers. Quantities round up to full packs.

Your price From $0.42
Picture of Flat washer M6, form A

Flat washer M6, form A

SKU: BM-FWM6
Boltmark M6 flat washer, form A, in bright zinc plated steel. It spreads the load under bolt heads and nuts, protects painted and soft surfaces and bridges slightly oversized holes. Made to ISO 7089 dimensions and packed in 200s, so there is always one to hand for every bolt.

Sold in washers. Quantities round up to full packs.

Your price From $0.42
Picture of Hex bolt M6 × 30 mm, zinc plated

Hex bolt M6 × 30 mm, zinc plated

SKU: BM-HBM630
Boltmark M6 × 30 mm hex head bolt in property class 8.8 steel with a bright zinc finish. A general-purpose structural bolt for steelwork, machinery guards, brackets and racking, sold in packs of 50 with consistent threads that run on cleanly every time.

Sold in bolts. Quantities round up to full packs.

Your price From $0.42
Picture of Hex bolt M6 × 40 mm, stainless A2

Hex bolt M6 × 40 mm, stainless A2

SKU: BM-HBSM640
Boltmark M6 × 40 mm hex head bolt in A2 stainless steel. It will not rust in rain, damp or wash-down areas, so it suits outdoor brackets, handrails, signage and food or drink plant. Supplied in packs of 25, with a clean natural finish that needs no painting.

Sold in bolts. Quantities round up to full packs.

Your price From $0.42
Picture of Hex nut M6, zinc plated

Hex nut M6, zinc plated

SKU: BM-HNM6
Boltmark M6 full hex nut in grade 8 steel with a bright zinc finish. It matches grade 8.8 bolts and studding for structural and general engineering joints. Packed in 100s with clean, accurate threads that run on by hand and won't strip at full torque.

Sold in nuts. Quantities round up to full packs.

Your price From $0.42
Picture of Nyloc nut M8, zinc plated

Nyloc nut M8, zinc plated

SKU: BM-NNM8
Boltmark M8 nyloc nut with a nylon locking ring that grips the bolt thread and resists loosening under vibration. Grade 8 steel with a bright zinc finish, it suits machinery, trailers and anything that shakes. Packs of 100 for workshop and van stock.

Sold in nuts. Quantities round up to full packs.

Your price From $0.42
Picture of Spring washer M8

Spring washer M8

SKU: BM-SWM8
Boltmark M8 spring washer with a square section, made from hardened spring steel and zinc plated. It adds spring tension under a nut or bolt head to help keep joints tight under light vibration. Packed in 200s for workshops, maintenance stores and van stock.

Sold in washers. Quantities round up to full packs.

Your price From $0.42
Picture of Flat washer M8, form A

Flat washer M8, form A

SKU: BM-FWM8
Boltmark M8 flat washer, form A, in bright zinc plated steel. It spreads the load under bolt heads and nuts, protects painted and soft surfaces and bridges slightly oversized holes. Made to ISO 7089 dimensions and packed in 200s, so there is always one to hand for every bolt.

Sold in washers. Quantities round up to full packs.

Your price From $0.42
Picture of Hex bolt M6 × 40 mm, zinc plated

Hex bolt M6 × 40 mm, zinc plated

SKU: BM-HBM640
Boltmark M6 × 40 mm hex head bolt in property class 8.8 steel with a bright zinc finish. A general-purpose structural bolt for steelwork, machinery guards, brackets and racking, sold in packs of 50 with consistent threads that run on cleanly every time.

Sold in bolts. Quantities round up to full packs.

Your price From $0.42
Picture of Hex bolt M6 × 60 mm, stainless A2

Hex bolt M6 × 60 mm, stainless A2

SKU: BM-HBSM660
Boltmark M6 × 60 mm hex head bolt in A2 stainless steel. It will not rust in rain, damp or wash-down areas, so it suits outdoor brackets, handrails, signage and food or drink plant. Supplied in packs of 25, with a clean natural finish that needs no painting.

Sold in bolts. Quantities round up to full packs.

Your price From $0.42
Picture of Hex nut M8, zinc plated

Hex nut M8, zinc plated

SKU: BM-HNM8
Boltmark M8 full hex nut in grade 8 steel with a bright zinc finish. It matches grade 8.8 bolts and studding for structural and general engineering joints. Packed in 100s with clean, accurate threads that run on by hand and won't strip at full torque.

Sold in nuts. Quantities round up to full packs.

Your price From $0.42
Picture of Nyloc nut M10, zinc plated

Nyloc nut M10, zinc plated

SKU: BM-NNM10
Boltmark M10 nyloc nut with a nylon locking ring that grips the bolt thread and resists loosening under vibration. Grade 8 steel with a bright zinc finish, it suits machinery, trailers and anything that shakes. Packs of 100 for workshop and van stock.

Sold in nuts. Quantities round up to full packs.

Your price From $0.42
Picture of Spring washer M10

Spring washer M10

SKU: BM-SWM10
Boltmark M10 spring washer with a square section, made from hardened spring steel and zinc plated. It adds spring tension under a nut or bolt head to help keep joints tight under light vibration. Packed in 200s for workshops, maintenance stores and van stock.

Sold in washers. Quantities round up to full packs.

Your price From $0.42
Picture of Flat washer M10, form A

Flat washer M10, form A

SKU: BM-FWM10
Boltmark M10 flat washer, form A, in bright zinc plated steel. It spreads the load under bolt heads and nuts, protects painted and soft surfaces and bridges slightly oversized holes. Made to ISO 7089 dimensions and packed in 200s, so there is always one to hand for every bolt.

Sold in washers. Quantities round up to full packs.

Your price From $0.42
Picture of Hex bolt M6 × 50 mm, zinc plated

Hex bolt M6 × 50 mm, zinc plated

SKU: BM-HBM650
Boltmark M6 × 50 mm hex head bolt in property class 8.8 steel with a bright zinc finish. A general-purpose structural bolt for steelwork, machinery guards, brackets and racking, sold in packs of 50 with consistent threads that run on cleanly every time.

Sold in bolts. Quantities round up to full packs.

Your price From $0.42
Picture of Hex bolt M8 × 25 mm, stainless A2

Hex bolt M8 × 25 mm, stainless A2

SKU: BM-HBSM825
Boltmark M8 × 25 mm hex head bolt in A2 stainless steel. It will not rust in rain, damp or wash-down areas, so it suits outdoor brackets, handrails, signage and food or drink plant. Supplied in packs of 25, with a clean natural finish that needs no painting.

Sold in bolts. Quantities round up to full packs.

Your price From $0.45
Picture of Hex nut M10, zinc plated

Hex nut M10, zinc plated

SKU: BM-HNM10
Boltmark M10 full hex nut in grade 8 steel with a bright zinc finish. It matches grade 8.8 bolts and studding for structural and general engineering joints. Packed in 100s with clean, accurate threads that run on by hand and won't strip at full torque.

Sold in nuts. Quantities round up to full packs.

Your price From $0.42
Picture of Nyloc nut M12, zinc plated

Nyloc nut M12, zinc plated

SKU: BM-NNM12
Boltmark M12 nyloc nut with a nylon locking ring that grips the bolt thread and resists loosening under vibration. Grade 8 steel with a bright zinc finish, it suits machinery, trailers and anything that shakes. Packs of 100 for workshop and van stock.

Sold in nuts. Quantities round up to full packs.

Your price From $0.42
Picture of Spring washer M12

Spring washer M12

SKU: BM-SWM12
Boltmark M12 spring washer with a square section, made from hardened spring steel and zinc plated. It adds spring tension under a nut or bolt head to help keep joints tight under light vibration. Packed in 200s for workshops, maintenance stores and van stock.

Sold in washers. Quantities round up to full packs.

Your price From $0.42