A 25-piece set of fully ground HSS drill bits in 0.5 mm steps, packed in a metal case with a size-marked rack. It covers clearance and pilot holes in steel, aluminium, plastics and timber, and keeps every size in its place in the van or workshop.
Torqline 1200 mm spirit level in box-section aluminium with three vials for level, plumb and 45°. It reads to 0.5 mm per metre, the milled base sits true on the work, and shock-absorbing end caps protect it when it is dropped or knocked.
Pack of 5 T-shank jigsaw blades for Metal, matched in tooth pitch and steel to the material. The T-shank fits tool-free blade clamps on almost all current jigsaws, and every blade is marked with its type so the right one comes out of the box.
Pack of 5 T-shank jigsaw blades for Wood, matched in tooth pitch and steel to the material. The T-shank fits tool-free blade clamps on almost all current jigsaws, and every blade is marked with its type so the right one comes out of the box.
Absorbent 2-ply blue centrefeed roll for wiping hands, spills, tools and surfaces in workshops, kitchens and warehouses. Strong when wet, low-lint, and fits standard centrefeed dispensers. Sold as a pack of 6 rolls.
Water-based, solvent-free degreaser for workshop floors, machinery, engine bays and commercial kitchens. Cuts through oil, grease and carbon at a dilution to suit the job, and rinses away without leaving a residue. Supplied as 5 litre.
Tungsten carbide tipped circular saw blade, 165 mm with 48 teeth, for softwood, hardwood, plywood and chipboard. The thin kerf eases the load on cordless saws, and the carbide teeth stay sharp far longer than steel blades.
Alcohol hand sanitiser gel with 70% ethanol and added moisturiser, for sites, offices, vehicles and washrooms. Dries quickly without a sticky feel and helps keep hands in good condition with frequent use. Supplied as 5 litre.
Torqline 8 m tape measure with a rubber-armoured case, a nylon-coated steel blade and a magnetic end hook. It is EU Class II accurate, the thumb lock holds the blade firmly, and the belt clip keeps it on hand on site.
Torqline 17 mm combination spanner in drop-forged chrome vanadium steel, with an open end and a 12-point offset ring. The ring grips the flats rather than the corners, so it turns tight nuts and bolts without rounding them.
pH-neutral, low-foam floor cleaner for daily mopping and scrubber dryers. Safe on sealed floors, vinyl, safety flooring and tiles, and leaves no sticky film. Dilute it for everyday use and keep your floors looking cared for. Supplied as 20 litre.
Folding FFP2 disposable respirator to EN 149, with an exhalation valve that keeps the mask cooler and reduces fogging of glasses. Adjustable nose clip, soft foam nose cushion and two head straps, supplied in boxes of 20 individually wrapped masks.
Soft polyurethane foam earplugs to EN 352-2, rated SNR 32 dB. The slow-recovery foam rolls down easily and expands to fill the ear canal, giving comfortable, reliable protection for workshops, plant rooms and sites. Supplied in bulk boxes for stores and dispensers.
Over-head ear defenders to EN 352-1, rated SNR 31 dB, with soft foam-filled cushions and an adjustable padded headband. Quick to put on and take off, easy to check at a glance, and reusable for years with replaceable hygiene kits.
Black bump cap to EN 812, styled like a baseball cap with a hard ABS insert inside a breathable cotton shell. It protects against knocks and scrapes from fixed objects in low spaces, such as plant rooms, vehicle pits and under-counter work, where a full helmet is not required.
Wide-vision safety goggles to EN 166 with a clear polycarbonate lens, soft PVC body and adjustable elastic strap. They seal around the eyes against dust, liquid droplets and flying particles, and give better protection than glasses where splashes or fine dust are a risk.
Yellow hi-vis vest to EN ISO 20471 class 2, with two reflective bands round the body and two-band braces over the shoulders. A light polyester waistcoat with a hook-and-loop front, easy to slip on over workwear, for sites, roads, yards and car parks.
Lightweight wraparound safety glasses with a Smoke polycarbonate lens, tested to EN 166 for low-energy impact. The lens is hard coated against scratches, blocks 99.9% of UV, and the soft nose pad and flexible arms make them easy to wear for a full shift.
Lightweight wraparound safety glasses with a Clear polycarbonate lens, tested to EN 166 for low-energy impact. The lens is hard coated against scratches, blocks 99.9% of UV, and the soft nose pad and flexible arms make them easy to wear for a full shift.
Lumenford 600 × 600 edge-lit LED panel, 30 W at 6500 K, that drops straight into a standard suspended ceiling grid. Even, low-glare light with a flicker-free driver included, for offices, classrooms, surgeries and shops replacing old fluorescent modular fittings.
Lumenford 50 W LED floodlight, IP65, in a die-cast aluminium body with a toughened glass front. Bright 6500 K light for yards, car parks, building fronts and loading bays, with an adjustable bracket and a pre-wired lead for quick installation.
Lumenford 600 × 600 edge-lit LED panel, 30 W at 4000 K, that drops straight into a standard suspended ceiling grid. Even, low-glare light with a flicker-free driver included, for offices, classrooms, surgeries and shops replacing old fluorescent modular fittings.
Voltaris 3-way lever connectors in packs of 50, for joining solid, stranded and fine-stranded conductors from 0.2 to 4 mm² without tools. Lift the lever, insert the stripped wire and close it; the clear housing lets you check every conductor is fully home, and each joint can be reopened.
Lumenford 30 W LED floodlight, IP65, in a die-cast aluminium body with a toughened glass front. Bright 6500 K light for yards, car parks, building fronts and loading bays, with an adjustable bracket and a pre-wired lead for quick installation.