Manufacturer: Galecore

Rotary screw compressor 20 hp with dryer

A 20 hp rotary screw compressor with a built-in refrigerated dryer and a 500 litre receiver, delivering 2100 L/min of dry air all day. Built for production lines and panel shops, it runs at 100% duty cycle and is installed and commissioned by us.
SKU: GC-RS20
Out of stock
Availability: Out of stock
Call for pricing

Ask us about price and availability.

Enquire now

Description

Product overview

The Galecore 20 hp rotary screw compressor is designed for businesses that need air from the start of the shift to the end. Instead of pistons, two meshing rotors compress the air smoothly and continuously, so the machine can run at full load all day without overheating.

A refrigerated dryer is built in. It cools the compressed air to remove most of the water before it reaches your pipework, tools and spray guns, which means fewer rust problems and better paint finishes.

Because the airend has few wearing parts, a well-serviced screw compressor can run for tens of thousands of hours. It also uses less electricity per litre of air than a piston machine worked hard, which shows on the bill over long shifts.

Key features

  • 100% duty cycle
  • Integrated refrigerated dryer
  • Controller with service reminders
  • Installed and commissioned

Where to use it

Screw compressors pay back where piston compressors would run flat out or need replacing every few years.

  • Vehicle body and paint shops
  • Production lines with air cylinders and blow-off
  • Joinery and furniture makers with several spray stations
  • Packaging and food plants (with suitable filtration)
  • Busy multi-bay vehicle workshops

Design and construction

The airend, motor, cooler and dryer sit inside a steel cabinet lined with sound-absorbing foam, mounted on the receiver to save floor space. Noise is low enough to install the compressor in the workshop itself rather than in a separate room.

The electronic controller shows pressure, temperature and running hours, and gives service reminders for the oil, filters and separator. It can start and stop remotely, and switches the motor off after a set time running unloaded to save energy.

Sizing your system

We size the compressor from your actual demand. Our survey looks at your tools, the hours you work and the pipework, and we can log your current compressor's running pattern if you have one.

  • 10 hp: two to three paint or production stations
  • 20 hp: larger shops with several bays and spray booths
  • Add filters at the point of use for paint and food work
  • Leaks in pipework often waste 20% or more of the air

Installation and servicing

Our engineers install the compressor, connect it to your pipework and electrical supply through your electrician, and commission it. Allow good ventilation around the cabinet, as the compressor gives off heat while running. The condensate from the dryer must go to an oil-water separator, not the drain.

Service it every 4,000 hours or yearly with fresh oil, filters and a separator element as needed. A service plan keeps the warranty on the airend valid.

The controller keeps a record of faults and service work, which helps you plan maintenance around production.

Quotes and ordering

Screw compressors are priced on request after a short survey. Account customers can request a quote from this page and track it under their account.

The quote lists the compressor, filters, pipework and commissioning separately, and can go to your company's approver from your account if orders need sign-off. Service plans can be added to the same quote.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Supply three phase 400 V
Motor (hp) 20
Tank (L) 500
Air delivery (L/min) 2100
Max pressure (bar) 10
General
Brand Galecore
Product type Rotary screw compressor with refrigerated dryer
Application Production lines, paint shops, continuous use
Country of manufacture Italy
Warranty 2 years; airend 5 years with service plan
Performance
Compressor type Oil-injected rotary screw
Duty cycle (%) 100
Pressure dew point (°C) +3
Noise level at 1 m (dB(A)) 67
Compressor oil capacity (L) 8
Service interval 4,000 hours or 12 months
Operating temperature (°C) 5 to 40
Cooling Air cooled
Electrical
Motor power (kW) 15
Full-load current (A) 29
Motor starter Star-delta
Controller Electronic, service reminders, remote start
Dimensions and weight
Net weight (kg) 450
Dimensions (L × W × H, mm) 1,800 × 750 × 1,700
Materials and construction
Transmission Direct coupled
Dryer refrigerant R513A
Air outlet 3/4" BSP
Tank drain Timed electronic drain
Compliance and safety
Standards ISO 1217 performance, 2014/29/EU
CE / UKCA marked Yes
Packaging and ordering
Delivery Installed and commissioned

FAQs

Why choose a screw compressor over a piston compressor?

A screw compressor can run continuously at full load, is much quieter and delivers air more efficiently over long hours. A piston compressor needs rest periods and wears faster when worked hard.

Is the air dry enough for spray painting?

The built-in dryer removes most of the moisture. For automotive paint we also recommend a coalescing filter and a fine filter at each booth, which we can include in the quote.

Where should it be installed?

In a clean, ventilated space with room around the cabinet for service and cooling air. Because it is quiet, many customers install it in the workshop rather than a separate plant room.

What happens to the condensate?

The water drained from the receiver and dryer contains traces of oil. It must go to an oil-water separator before discharge, which we can supply.

How often does it need servicing?

Every 4,000 running hours or once a year, whichever comes first. The controller reminds you when a service is due.

Why is there no price on the page?

The price depends on your installation and filtration needs. Request a quote and we will arrange a short survey.