A single-stage gas regulator for Argon and argon mix with a 0–30 L/min flow gauge and a 5/8" UNF outlet. The clear flowmeter lets you set exactly the gas a weld needs, which saves gas and prevents porosity, and the brass body is made for daily workshop use.
A 250 A replacement MIG torch with a Euro connector, swan neck and consumables fitted, ready to use. It fits any welder with a Euro connector, and the flexible cable and ball joint at the handle reduce wrist strain on long runs.
General-purpose E6013 rutile stick electrodes in 2.5 mm, vacuum-packed in a 5 kg box. They strike easily, run smoothly on AC or DC with little spatter and leave slag that peels away, which makes them the everyday choice for mild steel on small inverters and generators.
ER70S-6 steel TIG filler rod in 1.6 mm, cut to 1 m lengths and packed 5 kg to a sealed tube. Straight, clean rods feed smoothly by hand and give sound, porosity-free welds, and the tube keeps moisture and workshop dust off the wire until you use it.
A single-stage gas regulator for CO2 with a 0–30 L/min flow gauge and a 5/8" UNF outlet. The clear flowmeter lets you set exactly the gas a weld needs, which saves gas and prevents porosity, and the brass body is made for daily workshop use.
A 250 A replacement MIG torch with a Euro connector, swan neck and consumables fitted, ready to use. It fits any welder with a Euro connector, and the flexible cable and ball joint at the handle reduce wrist strain on long runs.
General-purpose E6013 rutile stick electrodes in 3.2 mm, vacuum-packed in a 5 kg box. They strike easily, run smoothly on AC or DC with little spatter and leave slag that peels away, which makes them the everyday choice for mild steel on small inverters and generators.
ER70S-6 steel TIG filler rod in 2.4 mm, cut to 1 m lengths and packed 5 kg to a sealed tube. Straight, clean rods feed smoothly by hand and give sound, porosity-free welds, and the tube keeps moisture and workshop dust off the wire until you use it.
A 360 A replacement MIG torch with a Euro connector, swan neck and consumables fitted, ready to use. It fits any welder with a Euro connector, and the flexible cable and ball joint at the handle reduce wrist strain on long runs.
General-purpose E6013 rutile stick electrodes in 4.0 mm, vacuum-packed in a 5 kg box. They strike easily, run smoothly on AC or DC with little spatter and leave slag that peels away, which makes them the everyday choice for mild steel on small inverters and generators.
ER70S-6 steel TIG filler rod in 3.2 mm, cut to 1 m lengths and packed 5 kg to a sealed tube. Straight, clean rods feed smoothly by hand and give sound, porosity-free welds, and the tube keeps moisture and workshop dust off the wire until you use it.
A 360 A replacement MIG torch with a Euro connector, swan neck and consumables fitted, ready to use. It fits any welder with a Euro connector, and the flexible cable and ball joint at the handle reduce wrist strain on long runs.
ER316L stainless TIG filler rod in 1.6 mm, cut to 1 m lengths and packed 5 kg to a sealed tube. Straight, clean rods feed smoothly by hand and give sound, porosity-free welds, and the tube keeps moisture and workshop dust off the wire until you use it.
ER316L stainless TIG filler rod in 2.4 mm, cut to 1 m lengths and packed 5 kg to a sealed tube. Straight, clean rods feed smoothly by hand and give sound, porosity-free welds, and the tube keeps moisture and workshop dust off the wire until you use it.
ER316L stainless TIG filler rod in 3.2 mm, cut to 1 m lengths and packed 5 kg to a sealed tube. Straight, clean rods feed smoothly by hand and give sound, porosity-free welds, and the tube keeps moisture and workshop dust off the wire until you use it.