Product overview
The Galecore petrol compressor brings workshop air to places with no electricity. A 6.5 hp four-stroke engine drives a cast-iron, oil-lubricated pump through a guarded belt, filling a 70 litre tank to 10 bar. Two quick couplers let two people work from it at once.
The idle control is what makes it practical on site. When the tank reaches pressure, an unloader valve vents the pump and the engine drops to idle, so it uses less fuel and makes less noise until air is needed again.
The engine runs on ordinary unleaded petrol, so you can refuel from the same can as your other site machines. A fuel tap lets you shut off the supply before transport, which stops fuel flooding the carburettor.
Key features
- 6.5 hp petrol engine with idle control
- Two quick couplers
- Puncture-proof wheels
Where to use it
It is the answer when running cables or a generator just for air would be awkward.
- Framing and roofing crews with nail guns
- Fencing contractors and farm workshops
- Mobile tyre fitters and plant mechanics
- Blowing out irrigation lines and cleaning machinery
- Remote repairs on plant and trailers
Design and construction
The twin-cylinder cast-iron pump is the same type used on workshop compressors, so it handles long days. The engine has a low-oil shutdown, a recoil starter with a decompression valve for an easy pull, and a large air filter for dusty conditions.
Everything sits on a welded steel frame with two puncture-proof wheels and a long handle, so one person can move it across rough ground. A pressure gauge, regulator and safety valve are fitted on the control manifold.
Choosing and using it
Check the air use of your tools against the compressor's air delivery. A framing nailer uses little air per shot, so two nailers run comfortably. A 1/2 inch impact wrench or blow gun used continuously will make the engine work harder.
- Two framing nailers working together
- One 1/2 inch impact wrench on wheel nuts
- Tyre inflation and blow-down
- Not suited to continuous spraying or sanding
Safety and maintenance
Run it outdoors only, as the exhaust contains carbon monoxide. Keep it level when running, let it cool before refuelling and keep the belt guard in place. Drain the tank at the end of each day.
Keep the compressor out of heavy rain and cover it when parked overnight, as water in the air filter or fuel causes hard starting.
Change the engine oil after the first 20 hours and then every 100 hours. Check the pump oil weekly and change it every 300 hours. Clean both air filters regularly on dusty sites and check the belt tension monthly.
Delivery and ordering
The compressor ships on a pallet without fuel, with pump oil and engine oil supplied separately. Trade customers can add hoses, couplers and nailers to the same order and pay on account.
If you run several crews, ask about a spare parts kit with belts, filters and a valve set, so each machine can be serviced on site.
Demo product: invented for the Cartenvo B2B demo store.