A 350 synergic inverter MIG welder for three phase 400 V that also runs flux-cored wire, stick and lift TIG. Choose the wire and gas and it sets voltage and wire speed for you, and the 4-roll drive feeds steel, stainless and aluminium wire without crushing it.
A 60 air plasma cutter for single phase 230 V that cuts steel, stainless and aluminium up to 20 mm with a clean edge. The pilot arc starts without touching the plate, so painted, rusty and expanded metal cut easily, and the built-in regulator and filter protect the torch.
A 200 AC/DC inverter TIG welder with high-frequency start, pulse, 2T/4T and nine job memories. It gives a clean, controllable arc on stainless, mild steel and, on AC/DC models, aluminium, and it also welds with stick electrodes.
An auto-darkening welding helmet, true colour, side view, with a variable dark shade of 9 to 13, sensitivity and delay controls and a grind mode. Four arc sensors pick up low-current TIG, so you can set up with the helmet down and keep both hands on the job.