Tungsten carbide tipped circular saw blade, 165 mm with 24 teeth, for softwood, hardwood, plywood and chipboard. The thin kerf eases the load on cordless saws, and the carbide teeth stay sharp far longer than steel blades.
A 13-piece set of fully ground HSS drill bits in 0.5 mm steps, packed in a metal case with a size-marked rack. It covers clearance and pilot holes in steel, aluminium, plastics and timber, and keeps every size in its place in the van or workshop.
Fully ground 2 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
Pack of 5 T-shank jigsaw blades for Wood, matched in tooth pitch and steel to the material. The T-shank fits tool-free blade clamps on almost all current jigsaws, and every blade is marked with its type so the right one comes out of the box.
SDS-plus masonry bit, 6 × 160 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
Tungsten carbide tipped circular saw blade, 165 mm with 48 teeth, for softwood, hardwood, plywood and chipboard. The thin kerf eases the load on cordless saws, and the carbide teeth stay sharp far longer than steel blades.
A 19-piece set of fully ground HSS drill bits in 0.5 mm steps, packed in a metal case with a size-marked rack. It covers clearance and pilot holes in steel, aluminium, plastics and timber, and keeps every size in its place in the van or workshop.
Fully ground 3 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
Pack of 5 T-shank jigsaw blades for Metal, matched in tooth pitch and steel to the material. The T-shank fits tool-free blade clamps on almost all current jigsaws, and every blade is marked with its type so the right one comes out of the box.
SDS-plus masonry bit, 8 × 160 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
Tungsten carbide tipped circular saw blade, 190 mm with 24 teeth, for softwood, hardwood, plywood and chipboard. The thin kerf eases the load on cordless saws, and the carbide teeth stay sharp far longer than steel blades.
A 25-piece set of fully ground HSS drill bits in 0.5 mm steps, packed in a metal case with a size-marked rack. It covers clearance and pilot holes in steel, aluminium, plastics and timber, and keeps every size in its place in the van or workshop.
Fully ground 4 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
Pack of 5 T-shank jigsaw blades for Laminate, matched in tooth pitch and steel to the material. The T-shank fits tool-free blade clamps on almost all current jigsaws, and every blade is marked with its type so the right one comes out of the box.
SDS-plus masonry bit, 10 × 210 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
Tungsten carbide tipped circular saw blade, 190 mm with 48 teeth, for softwood, hardwood, plywood and chipboard. The thin kerf eases the load on cordless saws, and the carbide teeth stay sharp far longer than steel blades.
Fully ground 5 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
SDS-plus masonry bit, 12 × 210 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
Fully ground 6 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
SDS-plus masonry bit, 14 × 260 mm, with a four-cutter tungsten carbide head for concrete, brick, block and stone. The cross-shaped head drills round, accurate holes for anchors and plugs and resists jamming when it meets rebar.
Fully ground 8 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
Fully ground 10 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
Fully ground 12 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.