Manufacturer: Edgecraft

Jigsaw blades for Laminate, pack of 5

Pack of 5 T-shank jigsaw blades for Laminate, matched in tooth pitch and steel to the material. The T-shank fits tool-free blade clamps on almost all current jigsaws, and every blade is marked with its type so the right one comes out of the box.
SKU: EC-JBLAMINATE
In stock
Availability: In stock
Price
$4.60

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $4.37
50–199 $4.14
200+ $3.91

Description

Overview

The Edgecraft jigsaw blade range covers the three materials trade users cut most: wood, metal and laminate. This pack holds five Laminate blades, each with a T-shank that locks into the quick-change clamp of corded and cordless jigsaws.

Each blade type uses the steel and tooth geometry that suits its material, so it cuts faster and lasts longer than a general-purpose blade.

The three blade types

Choose by material first, then by the finish you need.

  • Wood: high-carbon steel, 6 TPI set and ground teeth for fast cuts in timber and board up to 50 mm
  • Metal: bi-metal, 21 TPI wavy set for sheet steel, aluminium and pipe from 1 to 3 mm
  • Laminate: high-carbon steel, 20 TPI reverse teeth that cut on the down stroke for a chip-free top face
  • All three carry the type and material on the shank

Design and construction

Wood blades have widely spaced, set teeth that clear sawdust quickly. The metal blade is bi-metal: a high-speed steel tooth edge welded to a flexible spring steel body, so it resists both wear and snapping. The laminate blade has its teeth pointing towards the shank, which pushes the top surface down instead of lifting it.

The T-shank has a shoulder that locates the blade in the clamp, so it stays straight and does not pull out under load.

Using the blades

Set the pendulum action high for fast cuts in softwood, and off for metal, laminate and curves. Run metal blades at lower speed with a little cutting oil. Clamp thin sheet between boards to stop it vibrating.

When using the laminate blade, cut with the decorative face up. Remember that a reverse-tooth blade pushes the saw away from the work, so hold the saw firmly against the surface. Change a blade when it starts to wander or burn.

Choosing the right blade

The rule of thumb is to keep at least three teeth in the material at all times. That is why the metal blade has fine teeth for thin sheet, while the wood blade has coarse teeth for thicker timber. Too few teeth in contact make the blade snag and break; too many make it clog and burn.

Use the wood blade for studs, joists and rough cuts in board where speed matters more than finish. Use the laminate blade for worktop cut-outs, sink holes and laminated flooring where the top face must stay clean. Use the metal blade for sheet steel, aluminium profiles, copper pipe and plastic trunking.

If you cut plastics such as PVC or acrylic, the metal blade at low speed usually gives the best result, as faster blades can melt the edge. The blades in this pack are Laminate blades, marked on the shank, so they are easy to tell apart in a mixed tool box.

Ordering

Blades come in a hard plastic case of five. Teams that cut mixed materials often order all three types together with quick order, so each van carries a full set.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type Laminate
General
Brand Edgecraft
Product type Jigsaw blade
Application Laminated board, worktops and flooring
Country of manufacture Switzerland
Warranty Against manufacturing defects
Performance
Teeth per inch (TPI) 20
Tooth pitch (mm) 1.3
Tooth form Reverse, down-cut
Cutting capacity (mm) 3 to 30
Cut quality Clean top face
Pendulum setting Off
Suitable tools Jigsaws with a T-shank blade clamp
Dimensions and weight
Blade length (mm) 100
Working length (mm) 75
Net weight (kg) 0.03
Materials and construction
Shank type T-shank
Blade material High-carbon steel (HCS)
Marking Type and material printed on the shank
Compliance and safety
Recommended PPE Safety glasses, hearing protection
Packaging and ordering
Pack quantity 5
Pack type Hard plastic case
Barcode type EAN-13
Storage temperature (°C) 5 to 40, dry

FAQs

Will these blades fit my jigsaw?

They fit any jigsaw with a T-shank clamp, which covers almost all current corded and cordless models. Older saws with a U-shank clamp need U-shank blades instead.

Why does the laminate blade cut on the down stroke?

Its teeth point the other way, so they push the top surface down instead of lifting it. That stops chips on the decorative face. Cut with the good side up and hold the saw firmly down.

Can I cut stainless steel with the metal blade?

Yes, for thin sheet up to about 1.5 mm. Use a low speed, no pendulum action and cutting oil. Thicker stainless needs a dedicated blade or a different tool.

Can I use the wood blade for curves?

It cuts gentle curves well. For tight curves, turn the pendulum off and feed slowly, or use a narrow scroll blade.

How do I know when to change the blade?

Change it when cutting slows, the saw starts to wander off the line or the cut edge burns. A blunt blade also makes the saw vibrate more.

Can I mix types in one order?

Yes. Each type is a separate product, so you can add all three to the cart or your quick order list in one go.