Manufacturer: Edgecraft

HSS drill bit 10 mm, pack of 10

Fully ground 10 mm HSS jobber drill bits, sold in packs of 10 for steel, cast iron, aluminium, plastics and timber. The 135° split point starts on the mark without a pilot hole, and the standard jobber length fits any drill chuck or drill stand.
SKU: EC-HSS10
In stock
Availability: In stock
Price
$13.80

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $13.11
50–199 $12.42
200+ $11.73

Description

Overview

The Edgecraft 10 mm HSS jobber drill is the everyday bit for metalwork and general fixing. It is ground from solid M2 high-speed steel rather than rolled, so the flutes and cutting lips are accurate and stay sharp for longer.

Each pack holds 10 identical bits. That suits workshops and site teams who get through the common sizes quickly and want spares in the van rather than a single bit in a set.

Where to use it

Use it in hand drills, cordless drill drivers, pillar drills and magnetic drill stands. It cuts mild and alloy steel up to about 900 N/mm², cast iron, brass, copper, aluminium, rigid plastics and timber.

  • Clearance holes for bolts and self-tapping screws
  • Pilot holes before larger bits or step drills
  • Brackets, angle iron, box section and sheet steel
  • Maintenance work on machinery and frames
  • Timber and board where a wood bit is not to hand

Design and construction

The 135° split point is self-centring. It reduces walking on curved or smooth surfaces and needs less feed force than a plain 118° point, which helps with cordless tools. The type N helix clears chips well in steel and most general materials.

Diameters are ground to h8 tolerance with a slight back taper, so the bit does not bind in the hole. Dimensions follow DIN 338 jobber lengths, the length most drill chucks and drill guides are made for.

Getting the best from it

Run the bit at the right speed for the material: smaller bits faster, larger bits slower. The recommended speed for mild steel is listed in the specifications. Halve it for stainless steel and roughly double it for aluminium.

Use cutting oil in steel, keep a steady feed so the bit cuts rather than rubs, and ease off as it breaks through. Clamp the workpiece; never hold small parts by hand. Blunt bits can be resharpened on a drill grinder at 135°.

Choosing the right size

For a clearance hole, choose a bit slightly larger than the bolt: 6.5 or 7 mm suits an M6 bolt, 9 or 10 mm suits M8, and 11 or 12 mm suits M10. For a tapping hole, choose the core size of the thread instead, for example 5 mm for M6 and 6.8 mm for M8.

For self-tapping screws into sheet steel, check the screw maker's pilot size, which depends on the sheet thickness. In timber, a pilot hole of about two thirds of the screw diameter stops hardwood splitting and makes driving easier.

If you drill holes above 8 mm in thick steel, work up in two steps. A smaller pilot reduces the load on the chisel edge of the larger bit, so the hole stays round and the bit lasts longer. The 10 mm size is listed with its overall and flute length in the specifications, so you can check it reaches through your material.

Ordering and packaging

Bits come in a clear, labelled plastic tube that keeps them dry and easy to count. Trade account holders can add several sizes at once with quick order, and tier prices apply when you buy more packs. Stock is shown on the product page for each size.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Diameter (mm) 10
Type HSS jobber
Material HSS-G (M2 high-speed steel), fully ground
Finish Bright
General
Brand Edgecraft
Product type HSS jobber drill bit
Application Steel, cast iron, non-ferrous metals, plastics and timber
Country of manufacture Czech Republic
Warranty Against manufacturing defects
Performance
Point angle 135° split point
Helix type Type N, right-hand cutting
Maximum material strength (N/mm²) 900
Recommended speed in mild steel (rpm) 800
Coolant Cutting oil recommended in steel
Resharpenable Yes
Dimensions and weight
Overall length (mm) 133
Flute length (mm) 87
Diameter tolerance h8
Net weight (kg) 0.62
Materials and construction
Shank type Straight, full diameter
Compliance and safety
Standards DIN 338 (dimensions)
Recommended PPE Safety glasses
Packaging and ordering
Pack quantity 10
Pack type Labelled plastic tube
Barcode type EAN-13
Storage temperature (°C) 5 to 40, dry

FAQs

Can these bits drill stainless steel?

Yes, but slowly. Use about half the speed you would use for mild steel, firm steady pressure and plenty of cutting oil. If the bit rubs instead of cutting, stainless work-hardens, so keep the feed going.

Do I need a pilot hole?

Usually not. The 135° split point starts on a centre-punch mark without wandering. For the 10 and 12 mm sizes in thick steel, a 4 or 5 mm pilot hole makes drilling easier with cordless tools.

Will they fit my drill chuck?

The shank is the same diameter as the bit, so any chuck that opens to that size will hold it. A standard 13 mm keyless or keyed chuck takes every size in this range.

What does jobber length mean?

It is the standard general-purpose length set out in DIN 338. It is long enough for most work but short enough to stay rigid. For deep holes you would need a long-series bit.

Can the bits be resharpened?

Yes. Because they are fully ground HSS, they can be resharpened on a drill bit grinder. Keep the 135° point angle and equal lip lengths so the bit cuts on centre.

Can I buy single bits instead of a pack of 10?

These sizes are sold in packs of 10 only. If you need a range of sizes for occasional use, a drill bit set is better value.