Manufacturer: Spatterline

TIG filler rod ER316L stainless 3.2 mm, 5 kg

ER316L stainless TIG filler rod in 3.2 mm, cut to 1 m lengths and packed 5 kg to a sealed tube. Straight, clean rods feed smoothly by hand and give sound, porosity-free welds, and the tube keeps moisture and workshop dust off the wire until you use it.
SKU: SP-TRER316LSTAINLESS32
In stock
Availability: In stock
Price
$84.00

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $79.80
50–199 $75.60
200+ $71.40

Description

Overview

Filler rod quality shows in the weld. Rods that are bent, dirty or oxidised cause porosity, inclusions and an uneven bead, however good the welder. These Spatterline rods are drawn to a tight diameter tolerance, cut straight to 1 m and packed in a sealed tube with a screw cap, so they stay clean on the bench.

Each rod end is stamped with its grade, which avoids mix-ups between steel and stainless rods on a busy bench.

The rods suit fabrication shops, pipework and maintenance teams, and anyone welding food, dairy and process equipment where clean, sound welds are part of the specification. The 5 kg tube is a practical size for a workshop: enough for steady use without rods sitting open for months.

Key features

  • 1 m rods, 5 kg tube
  • Batch certificate on request

Choosing the grade

Match the filler to the parent metal. Using the wrong grade can leave a weld that looks fine but cracks or corrodes in service.

  • ER70S-6 steel: mild and carbon steels, including slightly rusty or mill-scaled material
  • ER70S-6 has extra manganese and silicon to clean the weld pool
  • ER316L stainless: 316 and 316L, and 304 where better corrosion resistance is wanted
  • ER316L: low carbon content reduces the risk of corrosion along the weld
  • Steel rods are copper coated; stainless rods are bright drawn

Choosing the diameter

A good rule is to use a rod about the same diameter as the tungsten and no thicker than the material. Use 1.6 mm rod for sheet up to about 2 mm and for root runs on thin pipe. Use 2.4 mm for general fabrication from 2 to 6 mm, which is the most popular size. Use 3.2 mm for thicker plate, fillet welds and fill passes where you need to add metal quickly.

The recommended current range for each diameter is listed in the specifications. Stainless needs slightly less current than steel of the same thickness, because it conducts heat away more slowly.

Use and storage

Weld with pure argon shielding gas. Wipe each rod with a clean cloth and acetone before use if it has been handled with oily gloves. Keep the hot end of the rod inside the gas shield while you weld, so it does not oxidise between dips. Snip off any discoloured end before the next weld.

Store the tube closed, horizontal and in a dry place. Opened tubes should be capped after each use. Copper-coated steel rods left out in a damp workshop will rust and should not be used for critical welds.

Traceability and ordering

Each tube carries a batch number, and a type 3.1 inspection certificate to EN 10204 is available on request for work that needs traceable materials, such as pressure equipment and food processing plant. Rods are classified to AWS A5.18 (steel) and AWS A5.9 (stainless).

Tubes are sold individually. Trade customers can order several grades and sizes on one quick order, buy on account and save the list for repeat orders.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Diameter (mm) 3.2
Type ER316L stainless
Finish Bright drawn
General
Brand Spatterline
Product type TIG filler rod
Application 304, 316 and 316L stainless steel
Country of manufacture Italy
Performance
Shielding gas Pure argon (ISO 14175 I1)
Recommended current (A) 130–230
Elongation (%) 35
Impact toughness 60 J at −20 °C
Dimensions and weight
Net weight (kg) 5
Rods per tube (approx.) 78
Dimensions (L × W × H, mm) 1060 × 60 × 60
Packed weight (kg) 5.4
Materials and construction
Tensile strength (MPa) 570
Yield strength (MPa) 420
Typical composition (%) C 0.02, Cr 18.5, Ni 12, Mo 2.6
Rod length (mm) 1000
Rod marking Grade stamped on each rod end
Compliance and safety
Classification (AWS) AWS A5.9 ER316L
Classification (ISO) ISO 14343-A W 19 12 3 L
Inspection certificate EN 10204 type 3.1 on request
CE / UKCA marked Yes (EN 13479)
Packaging and ordering
Pack quantity 5 kg sealed tube
Storage temperature (°C) 5 to 35, dry
Shelf life Not limited in a sealed tube kept dry
Barcode type EAN-13

FAQs

Can I use ER70S-6 rod for MIG welding?

No, these are straight cut lengths for TIG welding. MIG welding needs wire on a spool. ER70S-6 is also sold as MIG wire, which is the same alloy in a different form.

Which rod should I use on 304 stainless?

ER308L is the usual match for 304, but ER316L is widely used on 304 as well and gives a weld with better corrosion resistance. It is a sensible single stock grade if you weld both 304 and 316.

Can I weld galvanised steel with ER70S-6?

It is possible after grinding the zinc coating back from the joint, as zinc causes porosity and harmful fumes. Weld with good fume extraction and treat the finished weld with a zinc-rich paint.

What size rod should I start with?

2.4 mm is the most useful all-round size for material from 2 to 6 mm. Add 1.6 mm if you weld thin sheet or tube, and 3.2 mm for heavier plate.

Can I get a material certificate?

Yes. Every tube carries a batch number, and an EN 10204 type 3.1 inspection certificate can be supplied on request. Mention the batch number when you ask.

How should I store opened tubes?

Keep the cap on, store tubes horizontally in a dry place and avoid temperature swings that cause condensation. Steel rods with surface rust should be cleaned or set aside for non-critical work.