Manufacturer: Spatterline

MIG torch 360 A, Euro connector, 3 m

A 360 A replacement MIG torch with a Euro connector, swan neck and consumables fitted, ready to use. It fits any welder with a Euro connector, and the flexible cable and ball joint at the handle reduce wrist strain on long runs.
SKU: SP-MT3603
In stock
Availability: In stock
Price
$189.00

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $179.55
50–199 $170.10
200+ $160.65

Description

Overview

The torch is the part of a MIG welder that takes the most wear. Cables get crushed, liners clog and handles crack. This Spatterline torch is a direct replacement for any machine with a Euro (central) connector, and it comes with a contact tip, tip holder, gas nozzle and steel liner fitted, so you can connect it and weld.

It is also a sensible upgrade. A longer cable gives more reach on site, and a higher-rated torch runs cooler at the same current.

Key features

  • Euro connector
  • Contact tips and shroud fitted
  • Liner suits 0.8–1.2 mm steel wire

Choosing the right torch

Choose the rating by the current you weld at, not the maximum of the machine. A torch running near its rating gets hot, and contact tips wear faster. Choose the length by how far you need to reach: a 3 m cable feeds wire most reliably, especially soft aluminium wire, while a 4 m cable gives more freedom around large work.

  • 250 A: welders up to about 250 A, sheet and general fabrication
  • 360 A: three phase welders, thicker plate and long runs
  • 3 m: the best wire feed, ideal for aluminium
  • 4 m: more reach on site and around large parts

Design and construction

The swan neck is a brass tube with an insulated cover, shaped to give good access to fillet and corner joints. A ball joint at the back of the handle lets the cable swing freely, which reduces the pull on your wrist. The cable is a coaxial design with a tough outer sheath that resists spatter and abrasion. The Euro connector has a brass body and a gas seal, and tightens by hand.

Fitting and liners

The torch comes with a steel liner for 0.8 to 1.2 mm steel and stainless wire. For aluminium wire, fit a PTFE or carbon liner, and use a contact tip one size larger than the wire. When fitting a new liner, lay the cable out straight and trim the liner flush with the tip holder so the wire cannot snag.

Before connecting, check that the wire drive rolls on your welder match the wire size you are using.

Care and consumables

Most feed problems start at the torch. Clean spatter from the nozzle regularly, and use anti-spatter spray or gel to slow the build-up. Replace contact tips when the bore wears oval or the arc starts to wander. Blow the liner through with dry compressed air each time you change a spool, and replace it when the wire starts to drag. Keep the cable as straight as possible while welding.

Contact tips, nozzles and liners are sold separately in trade packs.

Compliance and ordering

The torch is designed to IEC 60974-7 and is CE and UKCA marked. Trade customers can order torches and consumables together, buy on account and save a quick order list for regular tip and nozzle top-ups.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Length (m) 3
Type MIG torch
Output (A) 360
General
Brand Spatterline
Product type Gas-cooled MIG torch
Application Replacement torch for Euro-connector MIG welders
Country of manufacture Italy
Warranty 1 year (consumables excluded)
Performance
Rating with mixed gas (A) 320
Rated duty cycle 60%
Wire diameter range (mm) 0.8–1.6
Cable length (m) 3
Cooling Gas cooled
Dimensions and weight
Net weight (kg) 2.6
Packed weight (kg) 3.0
Materials and construction
Torch connector Euro (central) connector
Swan neck Brass, 45° bend, insulated
Handle Glass-filled nylon with ball joint
Cable Coaxial, abrasion-resistant outer sheath
Liner fitted Steel liner for 0.8–1.2 mm wire
Contact tip thread M8
Contact tip fitted 1.0 mm, copper chromium zirconium
Gas nozzle Conical, push-on
Compliance and safety
Standards IEC 60974-7
CE / UKCA marked Yes
RoHS compliant Yes
Packaging and ordering
Pack quantity 1
Consumables Tips in packs of 10, nozzles in packs of 2
Barcode type EAN-13

FAQs

Will this torch fit my welder?

It fits any MIG welder with a Euro (central) connector, which is the most common type. Check that the gas and trigger pins line up with your machine's socket. It does not fit welders with a fixed torch.

Which rating do I need?

Choose a torch rated above the current you actually weld at. The 250 A torch suits most single phase welders, and the 360 A torch suits three phase machines and long runs at high current.

Can I use it for aluminium?

Yes, after fitting a PTFE or carbon liner and contact tips sized for aluminium wire. A 3 m torch feeds soft aluminium wire more reliably than a 4 m one.

How often should I change the contact tip?

Change it when the bore wears oval, the arc wanders or the wire starts to stick. With daily welding that can be every few days. Keep spares to hand, as a worn tip is the most common cause of a poor arc.

Why does the wire feed badly with a new torch?

Check that the liner suits the wire size and is trimmed to the right length, that the contact tip matches the wire and that the drive rolls are set correctly. Keep the cable straight while you weld.

Can I order spare consumables with it?

Yes. Tips, nozzles and liners are sold separately and listed under related products. Trade customers can save them to a quick order list and buy on account.