Product overview
A bump cap protects the head against bumping into things: pipes, ducts, shelving, vehicle chassis and the edges of cupboards. It looks and wears like an ordinary baseball cap, so people are happy to keep it on, but a moulded shell inside spreads the force of a knock.
The outer is a cotton twill cap with mesh side panels for air flow and a reflective strip at the back. The hard insert sits in a foam-padded liner and can be removed so the cap can be washed.
When to wear one
Bump caps are for areas where the risk is hitting your head on something fixed. They are not a substitute for a safety helmet and do not protect against falling or thrown objects. If anything could fall from above, wear an EN 397 helmet.
Your risk assessment decides which you need. Many sites use bump caps in workshops and facilities areas, and helmets on construction sites.
- Vehicle workshops and inspection pits
- Plant rooms and ceiling voids
- Facilities and building maintenance
- Warehouses with low racking
- Food production and engineering
Design and construction
The ABS insert is shaped to the crown and has vents that line up with the mesh panels, so air can flow while the cap is worn. Foam pads between the insert and the head absorb some energy and keep the shell off the scalp.
A hook-and-loop strap at the back adjusts the fit from 55 to 62 cm. The 7 cm peak shades the eyes; a short-peak version is better where people look up at close range, but the standard peak suits most work.
Fit and use
Adjust the back strap so the cap sits firmly without pressing, with the insert covering the top of the head. The cap should not move when you bend over.
Navy and black colours hide grease and dirt in workshops. Both give the same protection.
Keep long hair tied back under the cap and do not wear a beanie or hood underneath, as extra layers change how the insert sits and reduce the protection it gives.
Care and replacement
Remove the insert and hand wash the cap at 30 °C, then let it dry before putting the insert back. Wipe the insert with warm soapy water. Do not use solvents on the insert or leave the cap in strong sunlight for long periods.
Replace the insert after any hard impact or if it is cracked, and replace the whole cap when the fabric is worn or the strap no longer holds. Under regular use, plan to replace the cap every two to three years.
Ordering and branding
Bump caps are sold singly and in packs of 10 of one colour. The front panel suits an embroidered logo; ask your account manager about branded orders. Trade accounts see their tier prices on packs.
Demo product: invented for the Cartenvo B2B demo store.