Manufacturer: Lumenford

LED panel 600 × 600, 30 W, 6500 K

Lumenford 600 × 600 edge-lit LED panel, 30 W at 6500 K, that drops straight into a standard suspended ceiling grid. Even, low-glare light with a flicker-free driver included, for offices, classrooms, surgeries and shops replacing old fluorescent modular fittings.
SKU: LF-PN306500K
In stock
Availability: In stock
Price
$24.50
Your price: $21.56 Save 12%
Deal ends 4 Jan 2027

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $20.49
50–199 $19.40
200+ $18.32

Accessories and spares

Description

Overview

This flat LED panel replaces the four-tube fluorescent modules found in many suspended ceilings. LEDs along the edges shine into a light guide plate, which spreads the light evenly across the whole face, so there are no bright spots or dark corners. A microprismatic diffuser controls glare, which makes the panel suitable for screen work.

The panel is only 10 mm deep and weighs under 3 kg, so it is easy to handle on a ladder and puts little load on the ceiling grid. The external driver connects with a plug-in lead, so panels can be swapped without rewiring.

Where to use it

The panels fit standard 600 mm grid ceilings with exposed T-bar.

  • Offices, meeting rooms and open-plan areas
  • Schools, colleges and training rooms
  • Surgeries, clinics and care homes
  • Shops and showrooms
  • Corridors and reception areas

Design and construction

The frame is extruded aluminium with a white powder-coated finish that matches most ceiling grids. Behind the diffuser sits the light guide plate and a reflector sheet, which sends light that would be lost upwards back into the room. The LEDs sit in the frame, which acts as a heat sink and keeps them at a steady temperature.

The driver is a separate constant-current unit with a fixed output and very low ripple, so there is no visible flicker or stroboscopic effect on moving machinery or screens. It has a clamped terminal block for the supply cable and a short low-voltage lead with a polarised connector to the panel.

Choosing power and colour

The 30 W panel gives around 3600 lumens, which suits corridors, offices with moderate task needs and areas with closely spaced fittings. The 40 W panel gives around 4400 lumens and suits classrooms, open-plan offices and rooms with higher ceilings where fewer fittings are wanted. Use a lighting design to confirm the layout and the illuminance on the working plane.

4000 K is a neutral white that most people find comfortable for offices and schools. 6500 K is a cool daylight white, often chosen for clinical rooms, workshops and retail displays where colours need to look crisp.

Installation and care

Lift out a ceiling tile, place the driver on the back of the panel or next to it in the void, connect the supply to the driver's terminal block and plug the driver into the panel. Lower the panel into the grid. For plasterboard ceilings, use a surface-mounting frame or a recessed frame kit, sold separately.

Clean the diffuser with a dry or slightly damp microfibre cloth. Do not use solvents, which can cloud the acrylic.

  • Isolate the lighting circuit before working in the ceiling
  • Support the driver so its weight does not hang on the lead
  • Keep the driver away from heat sources in the void

Compliance and ordering

Panels are made to EN 60598-1 and fall into photobiological risk group RG0 under EN 62471, which means no risk in normal use. They are packed singly in a strong carton, with the driver in the same box. Facilities teams and contractors often order panels by the floor; trade tier prices apply to larger quantities and the quote basket handles full-project orders.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Power (W) 30
Colour temperature 6500 K
IP rating IP20
General
Brand Lumenford
Product type Edge-lit LED panel, recessed
Application Suspended ceilings with 600 mm grid
Country of manufacture China
Warranty 5 years
Performance
Luminous flux (lm) 3600
Efficacy (lm/W) 120
Colour rendering (CRI) > 80
Glare rating (UGR) < 19
Beam angle (°) 120
Rated life (hours, L70) 50,000
Operating temperature (°C) -10 to +40
Electrical
Input voltage (V) 220 to 240 AC, 50/60 Hz
Power factor > 0.9
Driver External, constant current, flicker-free
Dimmable No
Protection class Class II
Dimensions and weight
Dimensions (L × W × H, mm) 595 × 595 × 10
Net weight (kg) 2.7
Packed weight (kg) 3.4
Materials and construction
Frame Aluminium, white (RAL 9016)
Diffuser Microprismatic PMMA
Compliance and safety
Energy class E
Photobiological risk group RG0 (EN 62471)
Standards EN 60598-1, EN 62471
CE / UKCA marked Yes
RoHS compliant Yes
Packaging and ordering
Pack quantity 1 panel with driver
Barcode type EAN-13

FAQs

Will the panel fit my ceiling grid?

It fits standard 600 × 600 mm grids with exposed T-bar. Some older ceilings use 625 mm grids, which need a different panel size, so measure a tile before ordering.

Can I fit the panel in a plasterboard ceiling?

Yes, with a surface-mounting frame or a recessed mounting kit. These are sold separately. The panel itself is designed to sit in a grid.

Is the panel suitable for computer work?

Yes. The microprismatic diffuser keeps the unified glare rating below 19, which is the usual target for offices and classrooms with screens.

Can I dim the panel?

No, this version has a fixed-output driver and is not dimmable. Connecting it to a dimmer can damage the driver and will void the warranty.

Which colour temperature should I choose?

Choose 4000 K for most offices and schools, as it is neutral and comfortable for long periods. Choose 6500 K where a cool, crisp light is wanted, such as clinical rooms and workshops. Keep one colour temperature across a room.

How are the panels delivered?

Each panel is packed in its own carton with the driver. Larger orders ship on a pallet; see the delivery page for options and lead times.