Manufacturer: Boltmark

Hex nut M5, zinc plated

Boltmark M5 full hex nut in grade 8 steel with a bright zinc finish. It matches grade 8.8 bolts and studding for structural and general engineering joints. Packed in 100s with clean, accurate threads that run on by hand and won't strip at full torque.
SKU: BM-HNM5
In stock
Availability: In stock
Price
$0.50

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $0.48
50–199 $0.45
200+ $0.42

Sold in nuts. Quantities round up to full packs.

Description

Overview

The full hex nut is the standard partner for metric bolts, setscrews and threaded rod. These nuts are made to property class 8, so they can carry the full proof load of a grade 8.8 bolt of the same size without the threads stripping. A bright zinc plate with a clear trivalent passivate keeps them clean and protects against light corrosion indoors.

Every nut in the range is gauged for thread fit before packing, so it runs on smoothly by hand for the first few turns. That saves time on the job and makes it obvious when a bolt thread is damaged rather than the nut.

Sold in packs of 100 nuts.

Where to use it

Use these nuts wherever a standard hexagon nut is called for and the joint is indoors or under cover:

  • With grade 8.8 hex bolts and setscrews
  • On threaded rod for pipe and cable tray hangers
  • Machine frames, guards, brackets and fixtures
  • Racking, shelving and workbench assembly
  • As a lock nut, tightened against a second nut

Design and construction

The nut is cold forged and tapped with a 6H metric coarse thread. Both faces are chamfered, so the nut can be started from either side. The height is close to the thread diameter, which gives enough engaged thread for the nut to match the strength of a grade 8.8 bolt.

The zinc coating is thin enough not to bind on a plated bolt but still gives a uniform bright finish that is easy to spot in a parts bin.

Choosing the right nut

Match the thread size to the bolt: an M10 bolt needs an M10 nut. Our nuts all use the metric coarse pitch, which is the default for bolts, setscrews and studding sold in the UK. Fine-pitch threads, imperial sizes and stainless bolts need different nuts.

For joints that vibrate, such as machinery or vehicle parts, a nyloc nut or a spring washer helps stop the nut working loose. For outdoor work use stainless nuts with stainless bolts.

Fitting and care

Fit a flat washer under the nut on soft or painted surfaces. Tighten to the torque the bolt grade calls for; the nut is designed to take it. At least one full thread of the bolt should project beyond the nut once it is tight.

If a nut must be removed often, for example on a jig or an access panel, a light smear of oil on the thread makes it easier and protects the zinc. Discard nuts with damaged threads or rounded flats rather than forcing them back on.

Keep stock dry and in sealed bags to stop the zinc from dulling over time. Bagged nuts kept in a heated store will look and run the same years later.

Packaging and ordering

Nuts are sold in labelled packs of 100, each with a scannable barcode for stores and van stock. Add matching washers and bolts in the same order with quick order; trade prices for larger quantities show in the basket once you sign in.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Thread size M5
Material Steel grade 8
Type Full nut
Finish Bright zinc plated, clear trivalent passivate
General
Brand Boltmark
Product type Full hexagon nut, metric coarse thread
Application Bolts, setscrews and threaded rod, indoors or under cover
Country of manufacture Taiwan
Warranty 12 months against manufacturing defects
Performance
Proof load stress (MPa) 800 minimum
Neutral salt spray to white rust (h) 24 (ISO 9227)
Operating temperature (°C) -40 to +150
Dimensions and weight
Thread pitch (mm) 0.8
Width across flats (mm) 8
Nut height (mm) 4.7
Weight per 100 pieces (kg) 0.11
Packed weight (kg) 0.13
Materials and construction
Thread type Metric coarse, tolerance 6H
Coating thickness (µm) 5 to 8
Chamfer Both faces
Matching bolt grade Up to 8.8
Compliance and safety
Standards ISO 4032, ISO 898-2, ISO 4042
CE / UKCA marked Not required for this product
RoHS compliant Yes
Packaging and ordering
Pack quantity 100 nuts
Barcode type EAN-13 on pack label
Storage temperature (°C) 5 to 30, dry

Documents

FAQs

Will a grade 8 nut fit a grade 8.8 bolt?

Yes, that is the correct pairing. A grade 8 nut is designed to carry the full proof load of a grade 8.8 bolt of the same diameter, so the bolt will reach its rated load before the nut threads strip.

What thread pitch are these nuts?

All sizes use the ISO metric coarse pitch, for example 1.25 mm for M8 and 1.5 mm for M10. They will not fit fine-pitch bolts used on some vehicles and hydraulic parts.

Will a plain nut stay tight on vibrating equipment?

A correctly torqued nut holds well in most joints, but strong vibration can loosen it over time. For machinery and vehicles use a nyloc nut, or add a spring washer or a second lock nut.

Can I use these nuts on stainless steel bolts?

It is not recommended. The zinc nut will corrode first, stain the stainless bolt and can seize. Use A2 stainless nuts with stainless bolts.

Do the nuts fit standard threaded rod?

Yes. Metric threaded rod (studding) uses the same coarse pitch, so these nuts fit it directly. They are often used with washers for hanging pipework and cable tray.

How do I order larger quantities?

Nuts come in packs of 100. Enter the number of packs you need, or use quick order to add several sizes at once. Tier prices for larger quantities apply automatically to signed-in trade accounts.