Manufacturer: Aquaforce

Spray nozzle 25°

Quick-connect spray nozzle for professional pressure washers, with a 1/4 inch plug that clicks into the lance coupler in seconds. Colour coded by spray angle so operators pick the right one, and rated to 250 bar for daily trade and site use.
SKU: AF-NZ25
In stock
Availability: In stock
Price
$8.50

Fits these machines

Description

Overview

The nozzle decides how a pressure washer cleans. A narrow jet strips stubborn dirt from a small area; a wide fan cleans larger surfaces gently and quickly. Changing the nozzle is the simplest way to match the machine to the job, and worn nozzles are a common cause of low pressure.

These quick-connect nozzles fit the standard 1/4 inch coupler on most professional lances, so you can change spray pattern in seconds without tools.

Choosing the spray angle

The angle and colour are marked on every nozzle. Start with the widest angle that does the job, and only narrow it for stubborn dirt; a narrow jet held too close can damage paint, wood, sealant and soft stone.

  • 0° (red): a pencil jet for small, stubborn spots
  • 15° (yellow): stripping, heavy dirt on concrete and steel
  • 25° (green): general cleaning of vehicles, plant and paving
  • 40° (white): gentle rinsing of glass, cladding and paint
  • Turbo (grey): a rotating jet that cleans wide areas fast

Design and construction

The fixed nozzles are machined from stainless steel with a hardened insert, so the orifice keeps its shape and the spray stays even. The turbo nozzle has a ceramic seat and a rotating jet inside a rubber-sleeved stainless body, giving the cutting power of a 0° jet over the area of a fan nozzle.

All nozzles use orifice size 045, which suits machines delivering around 13 to 17 litres per minute. Using the right orifice size keeps the pump at its rated pressure.

Each nozzle has a hardened plug with a groove for the coupler balls, so it locks firmly and doesn't wear loose. The angle is stamped on the body as well as shown by the colour, so it can still be read when the colour has faded.

Use and care

Release the trigger and engage the gun's safety catch before changing nozzles. Pull back the coupler sleeve, push the nozzle in until it clicks, and give it a tug to check it is locked. Never point the lance at people, animals or electrical equipment.

Replace nozzles when the spray pattern becomes uneven or the machine loses pressure, as the orifice wears and opens up over time. A blocked nozzle can be cleared with a nozzle cleaning pin. Wear eye protection and suitable footwear when pressure washing, as the jet throws up grit and debris.

  • Store nozzles in a holder to keep the plug clean
  • Keep the coupler O-ring lubricated
  • Don't use the turbo nozzle with chemicals

Ordering

Nozzles are sold individually, so you can replace the one that wears fastest. Trade accounts often order a full set for each machine and save it as a list for quick reordering.

Before ordering, check the orifice size on your machine's rating plate or in its manual. If it is not 045, ask us for the matching size, as the wrong orifice affects pressure and pump life.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type 25°
Part code 25
General
Brand Aquaforce
Product type Quick-connect pressure washer nozzle
Application Professional pressure washers with 1/4 in quick coupler
Country of manufacture Italy
Warranty 6 months against manufacturing defects
Performance
Spray angle (°) 25
Colour code Green
Orifice size 045
Suits machine flow (l/min) 13 to 17
Maximum pressure (bar) 250
Maximum water temperature (°C) 150
Operating temperature (°C) +1 to +60
Chemical use Rinse only
Dimensions and weight
Overall length (mm) 38
Net weight (kg) 0.02
Packed weight (kg) 0.03
Materials and construction
Body material Stainless steel
Orifice Hardened stainless insert
Coupling type 1/4 in quick-connect plug
Compliance and safety
RoHS compliant Yes
REACH compliant Yes
Packaging and ordering
Pack quantity 1 nozzle
Packaging Blister card
Barcode type EAN-13

FAQs

Will these nozzles fit my lance?

They fit lances with a standard 1/4 inch quick-connect coupler, which most professional pressure washers use. Lances with a threaded or bayonet nozzle need an adaptor.

Which nozzle should I start with?

Start with the widest angle that removes the dirt, usually 25° or 40°, and only move to 15° or 0° for stubborn spots. A narrow jet held close can damage paint, wood, mortar joints and sealant.

My machine has a different flow rate. Does the orifice size matter?

Yes. Orifice 045 suits machines delivering about 13 to 17 litres per minute. A smaller orifice can overload the pump; a larger one lowers pressure. Check your machine's rating plate and ask us if you need a different size.

Can I apply detergent through these nozzles?

Most machines only draw chemical at low pressure through a wide-angle or soap nozzle. Use these nozzles for washing and rinsing, and don't use the turbo nozzle with chemicals, as they damage its seals.

Why has my pressure dropped?

A worn nozzle is the most common cause, as the orifice opens up over time. Swap in a new nozzle; if the pressure returns, replace the old one. If not, check the hose, inlet filter and pump.

Is the turbo nozzle safe on all surfaces?

No. It cleans like a 0° jet over a wider area, so it is ideal for concrete, paving and steel but too aggressive for paint, wood, soft stone and sealant. Test it on a hidden area first.