Manufacturer: Shieldwell

Safety goggles, Indirect vent

Wide-vision safety goggles to EN 166 with a clear polycarbonate lens, soft PVC body and adjustable elastic strap. They seal around the eyes against dust, liquid droplets and flying particles, and give better protection than glasses where splashes or fine dust are a risk.
SKU: SW-GGINDIRECTVENT
In stock
Availability: In stock
Price
$3.90

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $3.70
50–199 $3.51
200+ $3.32

Description

Product overview

Goggles give a closer seal than safety glasses. The flexible PVC body sits against the face all round the eyes, so dust, droplets and chips cannot get in from the sides, top or bottom. The wide lens gives a clear field of view to the sides as well as straight ahead.

The elastic strap adjusts with a slide buckle and can be worn over a helmet or a hood, and the lens is replaceable on the indirect vent and over-specs models.

Choosing a model

The three models share the same lens and impact rating; the differences are in venting and fit.

If people on your site keep taking goggles off because they fog, the anti-mist model is usually the answer. If your team wears prescription glasses, choose the over-specs model rather than asking them to work without their glasses.

  • Indirect vent: covered vents let air in but block liquid droplets, good for chemical handling
  • Anti-mist: an anti-fog coating on the inside of the lens for humid work and changes of temperature
  • Over-specs: a deeper body that fits over most prescription glasses

Where to use them

Goggles suit work where glasses are not enough: mixing and decanting chemicals, cleaning with concentrated products, cutting and drilling overhead, demolition, sanding plaster and other fine dust, and using power tools that throw debris in every direction.

For heavy splash risks, such as pouring acids or using a pressure washer with chemicals, add a face shield over the goggles to protect the rest of the face.

Design and construction

The lens is polycarbonate, optical class 1, with a scratch-resistant hard coating outside. It is rated for medium-energy impact (B), a step up from most safety glasses, so it withstands fragments from chiselling and breaking out.

The body is soft PVC that stays flexible in cold weather and seals against different face shapes. There are no metal parts.

Because the body is flexible, one size fits most adult faces, including people who also wear a dust mask. Check that the mask does not lift the lower edge of the goggle away from the face.

Care and replacement

Rinse goggles in warm, soapy water after use and leave them to dry in the air. Avoid solvents and abrasive cleaners, which damage the lens coating. Do not wipe the inside of the anti-mist lens when it is dry, as this wears the coating; dab it with a soft cloth instead.

Replace goggles when the lens is scratched or cracked, the body has hardened or split, or the strap has lost its stretch. Goggles shared between people should be cleaned before each new wearer.

Store goggles in a clean bag or case away from sunlight, solvents and heat. Leaving them on a dashboard or hanging by the strap from a hook soon distorts the body and loosens the elastic.

Ordering and packs

Goggles are sold singly and in packs of 10 of one model. Trade accounts see their tier prices on packs, and you can add all three models to one order from the quick order form.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type Indirect vent
Standard EN 166
Lens Clear
General
Brand Shieldwell
Product type Safety goggles
Application Chemical handling, dust, overhead drilling, demolition
Country of manufacture Taiwan
Warranty 6 months against manufacturing defects
Performance
Optical class 1
UV protection 99.9% UV400
Field of use 3 (liquid droplets), 4 (coarse dust)
Anti-fog lens No
Ventilation Indirect, 4 covered vents
Dimensions and weight
Net weight (kg) 0.08
Dimensions (L × W × H, mm) 170 × 80 × 65
Materials and construction
Lens material Polycarbonate
Body material Soft PVC
Strap Elastic, adjustable, 25 mm wide
Metal free Yes
Replaceable lens Yes
Fits over prescription glasses No
Compliance and safety
Impact rating B (120 m/s medium-energy impact)
Standards EN 166, EN 170
PPE category Category II
CE / UKCA marked Yes
Packaging and ordering
Pack quantity 1; packs of 10
Barcode type EAN-13
Storage temperature (°C) -10 to 40

Documents

FAQs

When should I wear goggles instead of glasses?

Wear goggles when there is a risk of liquid splashes, fine dust or debris coming from several directions. Glasses protect mostly from the front and sides; goggles seal all the way round the eyes.

Will the goggles fit over my glasses?

The over-specs model has a deeper body that fits over most prescription frames. The indirect vent and anti-mist models sit close to the face and are meant to be worn on their own.

How do I stop them fogging up?

Choose the anti-mist model, keep the vents clear, and put the goggles on before you start sweating rather than halfway through a task. Clean the inside of the lens gently so you do not wear away the coating.

Can I wear them with a safety helmet?

Yes. The strap is long enough to go round a helmet, and the goggles can rest on the brim when not in use. Make sure the strap does not push the helmet out of position.

Are they suitable for welding or cutting with gas?

No. The clear lens is not a welding filter. Use goggles or a helmet with a filter of the correct shade for the process.

Can I buy replacement lenses?

Replacement lenses are available for the indirect vent and over-specs models; ask your account manager or use the contact form. The anti-mist goggle is sold as a complete unit.