FAQs
Will these nozzles fit my lance?
They fit lances with a standard 1/4 inch quick-connect coupler, which most professional pressure washers use. Lances with a threaded or bayonet nozzle need an adaptor.
Which nozzle should I start with?
Start with the widest angle that removes the dirt, usually 25° or 40°, and only move to 15° or 0° for stubborn spots. A narrow jet held close can damage paint, wood, mortar joints and sealant.
My machine has a different flow rate. Does the orifice size matter?
Yes. Orifice 045 suits machines delivering about 13 to 17 litres per minute. A smaller orifice can overload the pump; a larger one lowers pressure. Check your machine's rating plate and ask us if you need a different size.
Can I apply detergent through these nozzles?
Most machines only draw chemical at low pressure through a wide-angle or soap nozzle. Use these nozzles for washing and rinsing, and don't use the turbo nozzle with chemicals, as they damage its seals.
Why has my pressure dropped?
A worn nozzle is the most common cause, as the orifice opens up over time. Swap in a new nozzle; if the pressure returns, replace the old one. If not, check the hose, inlet filter and pump.
Is the turbo nozzle safe on all surfaces?
No. It cleans like a 0° jet over a wider area, so it is ideal for concrete, paving and steel but too aggressive for paint, wood, soft stone and sealant. Test it on a hidden area first.