Manufacturer: Scrubtec

HEPA filter H-400, vacuums

H13 HEPA filter H-400 for Scrubtec dry and wet-and-dry vacuums. It captures at least 99.95% of fine particles, so dust, allergens and fine debris stay in the machine instead of going back into the room. A sealed gasket stops air bypassing the media.
SKU: ST-HH400
In stock
Availability: In stock
Price
$24.00

Fits these machines

Description

Overview

A vacuum is only as clean as the air that leaves it. Without a fine exhaust filter, the smallest particles pass straight through the bag and motor and are blown back into the room, where they settle on surfaces again within hours.

This H13 HEPA filter sits after the main filter and captures at least 99.95% of particles at the most penetrating particle size. It is the right choice for offices, schools, healthcare settings, hotels and any site where people with allergies or asthma work.

Where to use it

The H-300 fits Scrubtec compact tub vacuums of 15 to 30 litres. The H-400 fits the larger wet-and-dry vacuums of 30 to 80 litres, with a bigger media area to match their higher airflow.

  • Office, school and hotel cleaning
  • Healthcare and care home housekeeping
  • Cleaning after light building work and fit-outs
  • Sites with allergy or air quality requirements

Design and construction

The media is pleated glass fibre, tested to EN 1822. Deep pleats give a large filter area in a small frame, which keeps the pressure drop low and the suction strong. A rigid polypropylene frame holds the pleats in shape, and a soft polyurethane gasket seals the filter into its housing so no air can go round it.

Each filter is individually tested and carries a label with its class and part code.

Fitting and care

Switch off and unplug the vacuum. Open the exhaust filter cover, lift out the old filter and wipe the housing and seal face with a dry cloth. Fit the new filter with the gasket facing the machine and close the cover until it locks.

HEPA media cannot be washed, tapped out or blown clean with compressed air; all three damage the fibres and the seal. Replace the filter when suction falls even though the main filter and bag are clean, or at least once a year in daily use.

  • Never wash or blow out a HEPA filter
  • Check the gasket is seated all the way round
  • Bag the old filter before disposal
  • Keep the main filter clean to extend HEPA life

Dust class and compliance

The filter element meets H13 on its own. The dust class of the vacuum, such as L, M or H, depends on the whole machine and is shown on its rating plate. Fitting this filter doesn't upgrade a vacuum to a higher dust class, but it does restore the filtration it was built with.

For hazardous dusts such as silica or wood dust, always use a vacuum that is certified for that dust class.

Ordering

Filters are packed singly in a sealed bag inside a carton, so they stay clean in a service van. Order by the part code on the old filter. Trade accounts can add them to a saved list and reorder with quick order alongside bags and other consumables for the vacuum fleet.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type HEPA filter
Part code H-400
General
Brand Scrubtec
Product type HEPA exhaust filter
Application Scrubtec wet-and-dry vacuums, 30 to 80 litres
Country of manufacture Czech Republic
Warranty 6 months against manufacturing defects
Performance
Filter class H13
Efficiency at MPPS (%) ≥ 99.95
Filter area (m²) 0.60
Maximum airflow (l/s) 60
Initial pressure drop (Pa) 170
Operating temperature (°C) 0 to +60
Washable No
Typical replacement interval 12 months in daily use
Dimensions and weight
Dimensions (L × W × H, mm) 290 × 190 × 50
Net weight (kg) 0.29
Packed weight (kg) 0.40
Materials and construction
Filter media Pleated glass fibre
Frame material Polypropylene
Seal Polyurethane foam gasket
Compliance and safety
Standards EN 1822-1
Individually tested Yes, with test label
RoHS compliant Yes
Packaging and ordering
Pack quantity 1 filter
Packaging Sealed bag in carton
Barcode type EAN-13
Shelf life 5 years in sealed packaging
Storage temperature (°C) +5 to +30

FAQs

Which filter fits my vacuum, the H-300 or the H-400?

The H-300 fits the compact tub vacuums of 15 to 30 litres, and the H-400 fits the larger wet-and-dry vacuums of 30 to 80 litres. The part code is printed on the frame of the old filter, and the dimensions on this page help if the label is worn.

Can I wash or blow out a HEPA filter to make it last longer?

No. Water, tapping and compressed air damage the glass-fibre media and can open gaps around the seal, so the filter no longer reaches H13. Replace it when suction drops, and keep the main filter and bag clean to make it last.

Does this filter make my vacuum suitable for silica or asbestos dust?

No. The dust class of a vacuum (L, M or H) is certified for the whole machine and shown on its rating plate. Asbestos and other hazardous dusts need a vacuum certified for them, and asbestos work also needs licensed or trained operatives.

How often should the HEPA filter be changed?

At least once a year in daily use, or sooner if suction falls while the bag and main filter are clean. Sites with heavy fine dust, such as after building work, may need to change it every few months.

What does H13 mean?

H13 is a class defined in EN 1822. A filter in this class stops at least 99.95% of particles at the size that is hardest to capture, around 0.1 to 0.3 microns.

How should I dispose of the old filter?

Put it straight into a bag and seal it, so the dust it holds isn't released. For normal cleaning dust it can go in general waste; if the vacuum collected hazardous dust, follow your site's waste procedure.