Product overview
These masks filter harmful dust, fibres and mists from the air you breathe. Each one folds flat in its own wrapper, which keeps it clean in a pocket or van, and opens into a cup shape that seals well around different faces.
The exhalation valve lets warm, moist breath out easily. That keeps the inside of the mask cooler and drier, reduces breathing effort on long tasks, and makes glasses and goggles far less likely to fog.
Choosing the right grade
EN 149 classes disposable respirators by how much they let through. Choose the grade from your risk assessment and the safety data sheet of the material you are working with. The assigned protection factor (APF) shows how much the mask reduces exposure when it fits well.
Never use a dust mask against gases, vapours or solvents; it gives no protection against them. Use a respirator with the right gas filter instead.
- FFP1 (APF 4): nuisance dusts, sweeping and light sanding of wood
- FFP2 (APF 10): plaster, cement, softwood and hardwood dust, most building dusts
- FFP3 (APF 20): silica from cutting stone or concrete, hardwood dust, lead, mould, fine powders
Fit testing and fitting
A mask only protects if it seals against the face. FFP3 and FFP2 masks used for regular work should be fit tested for each wearer, and the wearer must be clean shaven where the seal meets the skin. Stubble of even a day breaks the seal.
To fit: open the mask, place it under the chin, pull the straps over the head, mould the nose clip with both hands and check the seal by breathing in sharply. The mask should pull in slightly with no air leaking at the edges.
Where to use them
Typical uses include cutting and drilling masonry, sanding filler and timber, sweeping workshops, handling cement and plaster, insulation work and clearing out dusty lofts and voids. On tools that produce a lot of dust, also use on-tool extraction or water suppression.
Use and disposal
These masks are marked NR: not reusable. Use each one for a single shift at most, and change it earlier if breathing becomes harder, the mask is damaged, wet or dirty, or the seal no longer holds.
Do not cut, bend or wash the mask, and do not pull it down under the chin between tasks: the inside picks up dust and you then breathe it in when the mask goes back on.
Store unopened masks in their box, in a clean, dry place out of direct sunlight. Dispose of used masks in a sealed bag where they have been used with hazardous dusts such as lead or asbestos debris.
Ordering and packs
Masks are sold by the box of 20, each in its own wrapper. Trade accounts see their tier prices on multiple boxes, and quick order lets you add FFP2 and FFP3 boxes in one go. Keep a reorder list for stores and vans.
Demo product: invented for the Cartenvo B2B demo store.