Manufacturer: Scrubtec

Vacuum motor filter, scrubber dryers

Original-fit Vacuum motor filter (VM-210) for Scrubtec scrubber dryers. It keeps dirt, fibres and foam out of the parts that cost most to repair, and it can be rinsed and reused many times before it needs replacing. Made to the original size, so it seals properly in its seat.
SKU: ST-FVM210
In stock
Availability: In stock
Price
$7.50

Fits these machines

Description

Overview

A scrubber dryer has three filters that protect it from the dirt it picks up. The solution filter keeps grit out of the solution valve and spray jets. The recovery tank filter catches debris before it reaches the drain hose and vacuum path. The vacuum motor filter stops foam, fibres and water mist from being drawn into the vacuum motor.

Each one is cheap compared with the part it protects. A blocked or missing vacuum motor filter is the most common cause of early vacuum motor failure, and a damaged solution filter lets grit jam the solenoid valve.

The three filters

The vacuum motor filter VM-210 is an open-cell foam pad that sits under the recovery tank lid in front of the vacuum inlet. The recovery tank filter RT-330 is a stainless mesh basket that hangs inside the tank at the inlet. The solution filter SL-120 is a mesh element inside the clear housing in the solution line, under the machine.

  • VM-210: protects the vacuum motor from foam and spray
  • RT-330: catches debris in the recovery tank
  • SL-120: keeps grit out of the solution valve and jets
  • All three are washable and reusable

Design and construction

The foam used in the vacuum motor filter keeps its shape after repeated washing and resists the alkaline detergents used in scrubbing. The mesh filters use stainless steel woven mesh in polypropylene frames, so they don't rust or swell in the solution and recovery tanks.

Every filter is made to the original dimensions and seals correctly in its seat. A filter that doesn't seal lets dirt bypass it, which is worse than having no filter at all because the fault goes unnoticed.

Cleaning and replacement

Rinse the recovery tank filter after every shift, when you empty and rinse the tank. Wash the vacuum motor filter in clean water weekly or whenever it looks clogged, and let it dry before refitting. Check the solution filter weekly, or as soon as solution flow drops.

Replace a filter when the foam is torn, hardened or permanently stained, or when the mesh is split or the frame is cracked. Most fleets change the vacuum motor filter every three to six months.

  • Never run the machine without the vacuum motor filter
  • Don't use a pressure washer on foam or mesh filters
  • Fit filters dry or just damp, never dripping wet
  • Check the seal seat for debris before refitting

Ordering

Order by the part code on the filter or in the machine's parts list. The vacuum motor filter VM-210 replaces the older VM-200, which is no longer made. Contract cleaners and facilities teams often keep a set of all three filters per machine model, and trade accounts can add them to a saved list for quick reordering with the next service visit.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type Vacuum motor
Part code VM-210
General
Brand Scrubtec
Product type Scrubber dryer filter
Application Scrubtec walk-behind and ride-on scrubber dryers
Country of manufacture Poland
Warranty 6 months against manufacturing defects
Replaces VM-200
Fitting position Under recovery tank lid, at vacuum inlet
Performance
Filtration 45 ppi open-cell foam
Washable Yes
Cleaning interval Weekly
Typical replacement interval 3 to 6 months
Operating temperature (°C) +5 to +50
Chemical resistance Detergents from pH 2 to pH 12
Dimensions and weight
Dimensions (L × W × H, mm) 180 × 180 × 20
Net weight (kg) 0.03
Packed weight (kg) 0.05
Materials and construction
Filter material Polyurethane foam
Frame material None (self-supporting foam)
Compliance and safety
RoHS compliant Yes
REACH compliant Yes
Packaging and ordering
Pack quantity 1 filter
Packaging Labelled polybag
Barcode type EAN-13
Shelf life 5 years in original packaging
Storage temperature (°C) +5 to +30

Documents

FAQs

Which filter protects the vacuum motor?

The vacuum motor filter VM-210, the foam pad under the recovery tank lid. Always refit it after cleaning; running without it lets foam and spray reach the motor, which is the most common cause of vacuum motor failure.

Does the VM-210 fit machines that came with the VM-200?

Yes. The VM-210 replaces the VM-200 and fits the same seat. It uses a more durable foam that holds its shape better after washing.

Can I wash the filters in a dishwasher or with a pressure washer?

No. Rinse them under a tap with clean, lukewarm water and a little mild detergent if needed. High pressure and dishwasher heat damage the foam and can open up the mesh.

Why has my machine stopped putting down solution?

The most common cause is a blocked solution filter. Close the tap or drain the tank, unscrew the clear filter bowl under the machine, rinse the mesh and refit it with the seal seated correctly.

How often should I replace the filters rather than clean them?

Replace a filter when it is torn, hardened, split or will no longer come clean. As a guide, the vacuum motor filter lasts three to six months in daily use, and the mesh filters around a year.

Do these filters fit other brands of scrubber dryer?

They are made for Scrubtec machines. Other machines use different shapes and seal seats, so check the dimensions on this page against your old filter before ordering.