Manufacturer: Arcvane

TIG welder 200 A AC/DC

A 200 AC/DC inverter TIG welder with high-frequency start, pulse, 2T/4T and nine job memories. It gives a clean, controllable arc on stainless, mild steel and, on AC/DC models, aluminium, and it also welds with stick electrodes.
SKU: AV-TIG200ACDC
In stock
Availability: In stock
Price
$2,090.00

Description

Overview

This Arcvane TIG welder is made for work where weld appearance and control matter: stainless pipework, food and process equipment, thin sheet, tube frames and repair work. The high-frequency start strikes the arc without touching the tungsten to the work, so the tip stays sharp and there is no tungsten in the weld.

Every setting you need is on the front panel. Pre-flow, upslope, peak and base current, downslope and post-flow are set step by step, and the result can be saved as one of nine jobs.

Key features

  • HF arc start, pulse 0.5–200 Hz
  • AC balance and frequency on AC/DC models
  • Foot pedal and torch remote ready
  • Nine job memories

Applications

The DC model welds steel, stainless, copper and titanium. The AC/DC models add aluminium and magnesium, where alternating current breaks up the oxide layer on the surface.

  • Stainless handrails, tanks and hygienic pipework
  • Thin sheet and tube with pulse to control heat
  • Aluminium boat, trailer and vehicle repairs (AC/DC)
  • Root runs on pipe before filling with stick or MIG
  • Small parts, tooling and mould repairs

Controls that make a difference

Pulse switches between a high and a low current many times a second. The weld pool freezes slightly between pulses, which reduces distortion on thin sheet and makes out-of-position welds easier. On the AC/DC models, the balance control sets how much of the cycle cleans the oxide and how much puts heat into the work, and the frequency control narrows the arc for fillet welds.

A foot pedal or torch-mounted remote plugs into the front socket and gives you hands-free control of current while you weld. 2T and 4T trigger modes suit short tacks and long runs.

Choosing the right model

If you only weld steel and stainless, the DC model is lighter and simpler. Choose an AC/DC model if aluminium is part of your work now or likely to be. The 315 A model runs on three phase 400 V, has the duty cycle for production welding and will take a water-cooled torch for long sessions at high current.

This model runs on single phase 230 V. Check your supply and plug type in the specifications before ordering.

Use and care

Grind tungstens lengthways on a dedicated wheel, and use a smaller cup and a gas lens for better coverage on stainless. Set argon flow to around 6 to 10 L/min for most work; more is not better and causes turbulence. Blow dust out of the case regularly, and keep the torch cable away from hot work and sharp edges.

When welding with stick, change the leads over at the front sockets and choose MMA mode so hot start and arc force are active.

Compliance and ordering

The welder is designed to IEC 60974-1, IEC 60974-3 and IEC 60974-10 and is CE and UKCA marked. It comes with a gas-cooled torch, earth lead and argon hose. Trade customers can add filler rods, a regulator and tungstens on the same order and pay on their account.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type AC/DC
Output (A) 200
Supply single phase 230 V
Process TIG, MMA
General
Brand Arcvane
Product type Inverter TIG welder with pulse
Application Stainless, steel and (AC/DC) aluminium welding
Country of manufacture China
Warranty 3 years (torch and consumables excluded)
Performance
TIG current range (A) 5–200
MMA current range (A) 10–160
Duty cycle (TIG) 35% at 200 A
Pulse frequency (Hz) 0.5–200
AC frequency (Hz) 50–250
AC balance (%) 15–85
Upslope and downslope (s) 0–10
Post-flow (s) 0–25
Job memories 9
Operating temperature (°C) -10 to +40
Cooling Fan, thermostat controlled
Electrical
Open-circuit voltage (V) 62
Maximum input current (A) 32
Plug fitted 32 A blue (BS EN 60309)
Minimum generator (kVA) 9
Power factor 0.93
Dimensions and weight
Net weight (kg) 15.8
Dimensions (L × W × H, mm) 500 × 220 × 400
Packed weight (kg) 19
Materials and construction
Torch connector 35–50 Dinse with separate gas and control plugs
Torch cooling Gas cooled
Compliance and safety
Standards IEC 60974-1, IEC 60974-3, IEC 60974-10
CE / UKCA marked Yes
RoHS compliant Yes
Protection rating IP23S
Packaging and ordering
Pack quantity 1
Torch supplied 150 A gas-cooled TIG torch, 4 m
Supplied with Torch, earth lead, argon hose, spare cups and tungstens
Foot pedal Sold separately
Barcode type EAN-13

FAQs

Do I need the AC/DC model?

Only if you weld aluminium or magnesium. Steel, stainless, copper and titanium are all welded on DC, so the DC model covers them at a lower weight. If aluminium work is likely in future, the AC/DC model saves buying a second machine.

Will the high-frequency start interfere with other equipment?

HF start can disturb nearby electronics if leads are long or poorly routed. Keep torch and earth leads short and close together, earth the workpiece well and keep the machine away from computers and CNC controls. Lift start is available where HF is not allowed.

Which tungsten should I use?

A 2% lanthanated tungsten works well for both AC and DC and is a good all-round choice. Use 1.6 mm up to about 120 A and 2.4 mm above that. Grind DC tungstens to a point and leave a small flat or ball on AC.

What gas and flow rate do I need?

Use pure argon for all TIG welding. A flow of 6 to 10 L/min suits most work; increase it slightly with large cups or in a draught. Our argon regulator with flowmeter fits the gas hose supplied.

Can I fit a water-cooled torch?

The 315 A model is ready for a separate water cooler and water-cooled torch, which is worth it for long runs above about 200 A. The 200 A models are designed for gas-cooled torches.

Can I order a foot pedal with it?

Yes, the foot pedal is sold separately and plugs straight into the front control socket. Trade customers can add it, filler rods and a regulator to the same order. See the delivery page for shipping options.