FAQs
Can the 140 A model run from a 13 A socket?
Yes, it is fitted with a 13 A plug and runs 2.5 mm rods comfortably on a standard socket. At the top of its range with 3.2 mm rods it may trip a sensitive breaker, so use a dedicated circuit and avoid long extension leads.
Which electrodes should I use?
General-purpose E6013 rutile rods are the easiest to use and suit most mild steel work. Use low-hydrogen E7018 rods for structural or higher-strength joints, and keep them dry in a rod oven or sealed pack.
Will it run from a generator?
Yes. The inverter tolerates generator power well. Use at least the generator size in the specifications, start the generator before switching on the welder, and switch the welder off before stopping the generator.
What is the VRD switch for?
The voltage reduction device lowers the voltage at the electrode holder when you are not welding. Many sites and damp or confined spaces require it. Leave it on unless a particular rod type will not strike reliably.
Can I TIG weld with it?
Yes, in lift-TIG mode with a gas valve torch and an argon regulator. It works well on steel and stainless. It cannot weld aluminium, which needs an AC TIG machine.
Can I order electrodes and safety gear with it?
Yes. Electrodes, gloves and auto-darkening helmets are listed under related products and can go on the same order. Trade customers can buy on account and save a quick order list for repeat consumables.