Manufacturer: Arcvane

MIG welder 200 A, single phase 230 V

A 200 synergic inverter MIG welder for single phase 230 V that also runs flux-cored wire, stick and lift TIG. Choose the wire and gas and it sets voltage and wire speed for you, and the 4-roll drive feeds steel, stainless and aluminium wire without crushing it.
SKU: AV-MIG200
In stock
Availability: In stock
Price
$1,190.00

Description

Overview

This Arcvane MIG welder is built for fabrication shops, maintenance teams and site contractors who need one machine for most jobs. It welds solid steel, stainless and aluminium wire with gas, flux-cored wire without gas, and switches to stick or lift TIG when a job calls for it.

The synergic control does the set-up work. You pick the wire type, wire diameter and gas on the display, set the material thickness, and the machine matches voltage to wire speed. A trim control lets you fine-tune the arc by sound and finish.

Key features

  • Synergic programs for steel, stainless, aluminium and flux-cored wire
  • 4-roll geared wire drive, 15 kg spools
  • MMA (stick) and lift-TIG modes
  • Euro torch connector, 3-year warranty

Where to use it

The single phase models plug into a standard workshop supply or a suitably sized generator, which makes them a good fit for site repairs, agricultural work and smaller workshops. The three phase models have the duty cycle for long runs on structural steel, trailers, plant repairs and production work.

  • Sheet metal and vehicle panels from 0.8 mm
  • Gates, railings, frames and general fabrication
  • Structural steel and heavy plate on the three phase models
  • Aluminium with a PTFE liner and U-groove rolls
  • Outdoor work with self-shielded flux-cored wire

Design and construction

The wire drive is a geared 4-roll unit on a cast frame, so feed pressure is spread over four rolls instead of two. Soft aluminium wire and tubular flux-cored wire keep their shape, and the feed stays steady on long torch cables. The spool bay takes 300 mm spools, and the case is powder-coated steel with a recessed front panel that protects the controls when the machine is moved around.

Inverter technology keeps the weight down and makes the machine tolerant of small supply variations. That is why it runs well on site generators, provided the generator is sized correctly. A thermostat-controlled fan only runs when the machine needs cooling, which keeps grinding dust out of the electronics.

Choosing the right model

Match the model to the thickest material you weld often and to the supply you have. The 200 A and 250 A models suit steel up to about 8 and 10 mm in multiple passes, and they work on single phase. The 350 A and 400 A models need a three phase 400 V supply and are the right choice for continuous production welding, 1.2 mm wire and plate above 10 mm.

This model is rated at 25% at 200 A. If you regularly weld for more than a few minutes without a break, choose a model with a higher duty cycle rather than running a smaller one at its limit.

Use and care

Blow dust out of the case with dry compressed air every few months and more often in grinding areas. Check drive roll grooves and the torch liner when you change wire size, and replace contact tips as soon as the bore wears oval. Keep the gas hose and earth clamp in good condition, as a poor earth causes more problems than any setting.

On the single phase models, use the plug supplied and avoid long extension leads, which drop the voltage and limit output.

Compliance and ordering

The machine is designed and tested to IEC 60974-1 and IEC 60974-10 and is CE and UKCA marked. It ships with a Euro torch, earth lead, gas hose and drive rolls fitted. Trade account holders can add regulators, torches and wire to the same order through quick order, and spare parts are listed on this page under related products.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Output (A) 200
Supply single phase 230 V
Duty cycle 25% at 200 A
Process MIG/MAG, flux-cored, MMA, lift TIG
General
Brand Arcvane
Product type Synergic inverter MIG welder
Application Steel, stainless and aluminium fabrication and repair
Country of manufacture China
Warranty 3 years (torch and consumables excluded)
Performance
Welding current range (A) 30–200
Duty cycle at 100% (A) 100
Wire diameter range (mm) 0.6–1.0
Wire speed (m/min) 1.5–18
Spool size 5 kg (200 mm) or 15 kg (300 mm)
Wire drive 4-roll geared drive on a cast frame
Operating temperature (°C) -10 to +40
Cooling Fan, thermostat controlled
Electrical
Open-circuit voltage (V) 68
Maximum input current (A) 32
Plug fitted 16 A blue (BS EN 60309)
Minimum generator (kVA) 8
Power factor 0.93
Insulation class F
Dimensions and weight
Net weight (kg) 14.5
Dimensions (L × W × H, mm) 520 × 240 × 410
Packed weight (kg) 17
Materials and construction
Case Powder-coated steel
Torch connector Euro (central) connector
Compliance and safety
Standards IEC 60974-1, IEC 60974-10
CE / UKCA marked Yes
RoHS compliant Yes
Protection rating IP23S
Packaging and ordering
Pack quantity 1
Torch supplied 250 A Euro torch, 3 m
Supplied with Torch, earth lead, MMA lead, gas hose, 0.8/1.0 mm rolls
Barcode type EAN-13

Documents

FAQs

Can I run the single phase models from a normal wall socket?

The 200 A and 250 A models are fitted with industrial plugs because they draw more than a standard 13 A socket can supply at full output. Use a 16 A or 32 A supply as shown in the specifications. Running on a smaller supply trips the breaker at higher settings.

Will it weld aluminium?

Yes. Select the aluminium synergic program, fit U-groove drive rolls and a PTFE liner in the torch, and use pure argon. For regular aluminium work a 3 m torch feeds more reliably than a longer one.

Do I need gas for every job?

Solid wire needs shielding gas, usually an argon and CO2 mix for steel. Self-shielded flux-cored wire needs no gas, which makes it the better choice outdoors in wind. Swap the polarity lead inside the wire bay when you change between the two.

What size generator do I need?

Use at least the generator size listed in the specifications, and choose an inverter or AVR generator with clean output. An undersized generator causes an unstable arc and can trip the welder's protection.

Which regulator and torch fit this machine?

Any regulator with a 5/8" UNF outlet and a flowmeter fits the gas hose supplied. Replacement torches need a Euro connector and a rating at least equal to the current you weld at.

Can I buy it on my trade account?

Yes. Approved trade customers can order it on account, add it to a quick order list with wire and gas accessories, and see their own price when signed in. See the delivery page for shipping options for heavier items.