Manufacturer: Arcvane

Stick welder 140 A inverter

A compact 140 MMA inverter for single phase 230 V with hot start, arc force and anti-stick. It is light enough to carry up a ladder, runs on site generators and is forgiving with general-purpose and low-hydrogen electrodes, with lift TIG when you need it.
SKU: AV-ARC140
In stock
Availability: In stock
Price
$290.00

Description

Overview

Stick welding is still the simplest way to make strong welds on site, outdoors and on dirty or rusty steel. This Arcvane inverter makes it easier. It is a fraction of the weight of an old transformer welder, it strikes cleanly, and it holds the arc steady when the rod is pushed in close.

Three arc controls do most of the work. Hot start adds a burst of current when the arc strikes, arc force raises current when the arc gets short, and anti-stick drops the output if the rod freezes to the work so you can snap it free.

Key features

  • Hot start, arc force and anti-stick
  • Lift-TIG with an optional valve torch
  • Generator friendly
  • Shoulder strap and 3 m leads

Where to use it

The two single phase models are the natural choice for farm and estate maintenance, site fencing and gates, plant repairs and small workshops. The 250 A model runs on three phase and suits fabrication shops and steel erectors who burn larger rods all day.

  • Repairs on gates, trailers, brackets and farm equipment
  • Structural steel on site, including outdoor work
  • Welding from a generator where there is no mains
  • Low-hydrogen rods for higher-strength joints
  • Lift TIG on stainless with an optional valve torch

Design and construction

The inverter sits in a steel case with a moulded front panel that protects the controls and sockets. A thermostat-controlled fan cools the electronics, and the case is ventilated so dust passes through rather than settling on the boards. A switchable voltage reduction device lowers the open-circuit voltage when you are not welding, which is often required on construction sites and in damp areas.

Output sockets accept standard Dinse plugs, so you can extend the leads or fit your own electrode holder.

Choosing the right model

Pick the model by the largest rod you use often. The 140 A model runs 2.5 mm rods all day and 3.2 mm rods for short runs. The 180 A model handles 3.2 mm comfortably and 4.0 mm for shorter welds. The 250 A model runs 4.0 and 5.0 mm rods and has the duty cycle for continuous work.

This model is rated at 30% at 140 A. Running a rod near the top of the range on a small machine will trip the thermal cut-out sooner, so leave yourself some margin.

Use and care

Keep electrodes dry; damp rods spatter and cause porosity. Clean the work back to bright metal at the earth clamp. Blow dust out of the machine every few months, and check leads and clamps for damage before each job. When running from a generator, start the generator before switching on the welder.

Compliance and ordering

The welder is built to IEC 60974-1 and IEC 60974-10 and is CE and UKCA marked. It comes with a shoulder strap and leads ready to weld. Trade customers can order electrodes, gloves and a helmet in the same basket and buy on account.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Output (A) 140
Supply single phase 230 V
Duty cycle 30% at 140 A
Process MMA, lift TIG
General
Brand Arcvane
Product type MMA inverter welder
Application Site, farm and workshop stick welding
Country of manufacture China
Warranty 2 years
Performance
Welding current range (A) 10–140
Duty cycle at 100% (A) 77
Electrode diameter (mm) 1.6–3.2
Arc controls Hot start, arc force, anti-stick
Operating temperature (°C) -10 to +40
Cooling Fan, thermostat controlled
Electrical
Open-circuit voltage (V) 65
Maximum input current (A) 22
Plug fitted 13 A plug (BS 1363)
Minimum generator (kVA) 5
Power factor 0.93
Insulation class F
Dimensions and weight
Net weight (kg) 4.2
Dimensions (L × W × H, mm) 300 × 125 × 210
Packed weight (kg) 6.5
Materials and construction
Case Steel case with moulded front panel
Output sockets Dinse 10–25
Compliance and safety
Standards IEC 60974-1, IEC 60974-10
CE / UKCA marked Yes
RoHS compliant Yes
Protection rating IP23S
Voltage reduction device Yes, switchable
Packaging and ordering
Pack quantity 1
Supplied with Electrode holder and earth clamp on 3 m leads, strap
Barcode type EAN-13

Documents

FAQs

Can the 140 A model run from a 13 A socket?

Yes, it is fitted with a 13 A plug and runs 2.5 mm rods comfortably on a standard socket. At the top of its range with 3.2 mm rods it may trip a sensitive breaker, so use a dedicated circuit and avoid long extension leads.

Which electrodes should I use?

General-purpose E6013 rutile rods are the easiest to use and suit most mild steel work. Use low-hydrogen E7018 rods for structural or higher-strength joints, and keep them dry in a rod oven or sealed pack.

Will it run from a generator?

Yes. The inverter tolerates generator power well. Use at least the generator size in the specifications, start the generator before switching on the welder, and switch the welder off before stopping the generator.

What is the VRD switch for?

The voltage reduction device lowers the voltage at the electrode holder when you are not welding. Many sites and damp or confined spaces require it. Leave it on unless a particular rod type will not strike reliably.

Can I TIG weld with it?

Yes, in lift-TIG mode with a gas valve torch and an argon regulator. It works well on steel and stainless. It cannot weld aluminium, which needs an AC TIG machine.

Can I order electrodes and safety gear with it?

Yes. Electrodes, gloves and auto-darkening helmets are listed under related products and can go on the same order. Trade customers can buy on account and save a quick order list for repeat consumables.