Manufacturer: Voltcrest

Open-frame petrol generator 3.0 kVA

A 3.0 kVA open-frame petrol generator for building sites, with a steel roll cage, automatic voltage regulation and RCD protection on every outlet. Tough enough for daily site use, with recoil start and a fuel gauge you can read at a glance.
SKU: VC-PG30
In stock
Availability: In stock
Price
$690.00

Description

Product overview

The Voltcrest 3.0 kVA open-frame generator is made for building sites, farms and outdoor jobs where power tools need a reliable supply. A full steel roll cage protects the engine and alternator from knocks, and every outlet is protected by a residual current device, so it is ready for site use straight from the box.

Automatic voltage regulation keeps the output steady as loads switch on and off. That protects motors and gives drills, saws, mixers and floodlights the voltage they are designed for.

Key features

  • Automatic voltage regulation
  • RCD-protected 10 A and 15 A outlets
  • Fuel gauge and low-oil shutdown
  • Wheel kit on 5.5 kVA and up

Where to use it

Choose an open-frame generator for heavy tools and rough conditions. For laptops and sensitive electronics, an inverter generator is the better choice.

  • Builders running saws, breakers, mixers and drills
  • Fencing and landscaping crews away from a supply
  • Farms and smallholdings for pumps, welders and lights
  • Temporary lighting and heating for site cabins
  • Back-up power for workshops through a changeover switch

Design and construction

A single-cylinder overhead-valve petrol engine drives a brushless alternator at 3,000 rpm. The frame is welded 25 mm steel tube, powder coated against rust, with rubber anti-vibration mounts under the engine. The large steel fuel tank has a gauge on top and a wide filler with a strainer.

This model has recoil start. The 5.5 kVA and 8.0 kVA models come with a wheel kit and folding handles, so one person can move them around the site. The control panel carries the outlets, an hour meter, a voltmeter and the circuit breakers.

Choosing the right size

Add up the running power of the tools you will use at the same time, then check the largest motor's start-up load. Angle grinders, saws and compressors can draw two to three times their rated power for a moment as they start.

  • 3.0 kVA: one heavy tool, lights and chargers
  • 5.5 kVA: a breaker or saw with lights and a small compressor
  • 8.0 kVA: several trades at once or a large compressor
  • Allow about 20% headroom so the engine is not run flat out

Use and care

Run the generator outdoors only, on level ground and well away from openings into buildings. Check the oil before every start; the low-oil shutdown stops the engine if the level drops, but it should never be relied on. Turn the loads off before stopping the engine, and let it cool before refuelling.

Change the oil after the first 20 hours, then every 100 hours. Clean the foam air filter every 50 hours on dusty sites, and replace the spark plug once a year. Test the RCDs with the test buttons at the start of each week.

Packaging and ordering

The generator ships on a pallet without oil or fuel, with a spark plug spanner, an earth stake and the manual. Electric-start models include the battery, which is charged before dispatch. Account customers can order several units with quick order and see their tier prices before checking out.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Voltage 230 V
Supply single phase
Output (kVA) 3.0
Fuel Petrol
Start recoil start
General
Brand Voltcrest
Product type Open-frame site generator
Application Building sites, farms, temporary power
Country of manufacture China
Warranty 2 years
Performance
Rated output (kVA) 2.7
Engine type 4-stroke OHV, air cooled
Engine displacement (cc) 212
Fuel tank (L) 15
Run time at 50% load (h) 10
Engine oil capacity (L) 0.6
Noise level at 7 m (dB(A)) 70
Operating temperature (°C) -10 to 40
Electrical
Frequency (Hz) 50
Voltage regulation AVR, ±2%
AC outlets 2 × 10 A, 1 × 15 A
Starter battery None
Dimensions and weight
Net weight (kg) 45
Dimensions (L × W × H, mm) 600 × 445 × 450
Materials and construction
Frame 25 mm steel tube roll cage, powder coated
Wheel kit Not included
Compliance and safety
Earth leakage protection 30 mA RCD on every outlet
Low-oil shutdown Yes
Standards ISO 8528-13
CE / UKCA marked Yes
Packaging and ordering
Pack quantity 1
In the box Plug spanner, earth stake, manual

Documents

FAQs

Can I run a laptop from this generator?

It is not recommended. The AVR keeps the voltage steady for tools and lights, but the waveform is not as clean as an inverter generator's. For laptops, chargers and test equipment, choose one of our inverter generators.

Does it meet site electrical rules?

Every outlet is protected by a 30 mA RCD and the frame has an earth terminal, which is what most site rules ask for. Your site manager may also require a periodic inspection and test, so keep the RCD test record with the machine.

Do I need to earth the generator?

For most uses with tools plugged straight into the outlets, the RCDs give the protection needed. If you connect it to a distribution board or a building, an electrician should install an earth rod and check the arrangement.

Can it run a welder?

The 5.5 kVA and 8.0 kVA models will run a small stick or MIG welder at moderate settings. Check the welder's input current at the setting you use and leave some headroom, as welders draw heavy peak loads.

How often does it need a service?

Change the oil after the first 20 hours, then every 100 hours. Clean the air filter every 50 hours on dusty sites and replace the spark plug yearly. The hour meter on the panel makes it easy to keep track.

How is it delivered?

It is delivered on a pallet by a carrier with a tail-lift, without oil or fuel in the engine. See the delivery page for timings and areas.