Steel-braided high-pressure hose for pressure washers, rated 250 bar and hot water up to 155 °C. A single wire braid and a tough rubber cover resist kinking, abrasion and being dragged across yards, with M22 swivel ends for quick, twist-free connection.
Original-fit Solution filter (SL-120) for Scrubtec scrubber dryers. It keeps dirt, fibres and foam out of the parts that cost most to repair, and it can be rinsed and reused many times before it needs replacing. Made to the original size, so it seals properly in its seat.
Quick-connect spray nozzle for professional pressure washers, with a 1/4 inch plug that clicks into the lance coupler in seconds. Colour coded by spray angle so operators pick the right one, and rated to 250 bar for daily trade and site use.
Front and rear squeegee blade set in Gum rubber for 850 mm Scrubtec squeegee frames. Fresh blades pick up all the dirty water in one pass, leaving floors dry, streak-free and safe to walk on soon after cleaning. The rear blade can be turned to use all four edges.
510 mm disc scrubbing brush with Hard polypropylene bristles and a quick-fit hub. It clips straight onto Scrubtec scrubber dryers and single-disc machines for daily scrubbing of hard floors, with an even bristle pattern that wears flat.
Replacement drive belt 6PJ-1200 for the brush and traction drives of Scrubtec scrubber dryers and sweepers. Built to the original length and profile, so it sits correctly in the pulleys, tensions as designed and runs quietly from the first start.
Quick-connect spray nozzle for professional pressure washers, with a 1/4 inch plug that clicks into the lance coupler in seconds. Colour coded by spray angle so operators pick the right one, and rated to 250 bar for daily trade and site use.
Front and rear squeegee blade set in Polyurethane for 850 mm Scrubtec squeegee frames. Fresh blades pick up all the dirty water in one pass, leaving floors dry, streak-free and safe to walk on soon after cleaning. The rear blade can be turned to use all four edges.
Quick-connect spray nozzle for professional pressure washers, with a 1/4 inch plug that clicks into the lance coupler in seconds. Colour coded by spray angle so operators pick the right one, and rated to 250 bar for daily trade and site use.