Manufacturer: Scrubtec

Squeegee blade set 850 mm, Polyurethane

Front and rear squeegee blade set in Polyurethane for 850 mm Scrubtec squeegee frames. Fresh blades pick up all the dirty water in one pass, leaving floors dry, streak-free and safe to walk on soon after cleaning. The rear blade can be turned to use all four edges.
SKU: ST-SQ850POLYURETHANE
In stock
Availability: In stock
Price
$42.00

Fits these machines

Description

Overview

The squeegee is what leaves a floor dry after a scrubber dryer. The rear blade seals against the floor and wipes the water into a channel, the slotted front blade lets water through and lifts it, and the vacuum draws it into the recovery tank. When the edges round off or nick, the machine leaves streaks and wet lines, and floors stay slippery.

This set contains both blades for a 850 mm squeegee frame, cut to length and punched for the original fixings.

Gum rubber or polyurethane

Gum rubber blades are soft and follow uneven floors closely, so they give the driest result on tiles with grout lines, textured safety flooring and older concrete. They wear faster on rough floors and don't like oil.

Polyurethane blades are harder and last several times longer. They resist oil, grease and fats, which makes them the right choice for kitchens, food production, workshops and car parks. On very uneven floors they may leave thin water lines that a softer blade would pick up.

  • Gum rubber: grouted tiles, textured and uneven floors
  • Polyurethane: kitchens, workshops, oily or abrasive floors
  • Both: front blade slotted, rear blade solid
  • Rear blade has four usable edges

Choosing the size

The size is the width of the squeegee frame, not the scrub path. The 750 mm set fits the curved squeegee on 430 and 510 mm walk-behind machines; the 850 mm set fits the wider squeegee on larger walk-behind and compact ride-on machines. The blades are slightly longer than the frame because they follow its curve.

Fitting and turning

Remove the squeegee from the machine, release the clamp band or knobs and take out the old blades. Fit the new blades with the slots of the front blade facing down, line up the holes with the pins and tighten the clamp evenly.

The rear blade can be used four times. When the working edge rounds off, turn it top to bottom, then end to end, so each edge gets used before you replace it. Set the squeegee height so the rear blade bends back slightly, about 5 mm, across its whole width.

  • Rinse the squeegee and blades after every shift
  • Lift the squeegee when reversing or parking
  • Check for nicks and remove grit from the blade edge

Ordering

Each set is packed flat in a labelled sleeve so the blades stay straight. Many fleets keep one set per machine on the shelf, as a damaged blade can stop a machine mid-shift. Trade accounts can save blade sets to an order list with brushes and filters, and buy them on account with the next service order.

If you run machines on mixed sites, keep both grades in stock: gum rubber for general buildings and polyurethane for kitchens and workshops. Label the squeegees so operators know which blade is fitted.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type Squeegee blades
Grade Polyurethane
Width (mm) 850
General
Brand Scrubtec
Product type Squeegee blade set
Application Rear squeegee of Scrubtec scrubber dryers
Country of manufacture Italy
Warranty 6 months against manufacturing defects
Contents 1 front blade (slotted), 1 rear blade (solid)
Suitable floors Smooth and oily floors, kitchens, workshops
Performance
Usable edges, rear blade 4
Oil and grease resistance High
Abrasion resistance High
Operating temperature (°C) -10 to +70
Dimensions and weight
Blade length, front / rear (mm) 890 / 990
Blade height (mm) 45
Blade thickness, front / rear (mm) 3 / 4
Net weight (kg) 0.40
Packed weight (kg) 0.49
Materials and construction
Blade material Polyurethane
Hardness (Shore A) 85
Blade colour Clear amber
Compliance and safety
RoHS compliant Yes
REACH compliant Yes
Packaging and ordering
Pack quantity 1 set (2 blades)
Packaging Flat labelled sleeve
Barcode type EAN-13
Shelf life 5 years away from light and ozone
Storage temperature (°C) +5 to +25

FAQs

Should I choose gum rubber or polyurethane blades?

Gum rubber is softer and gives the driest result on grouted, textured or uneven floors. Polyurethane lasts much longer and resists oil and grease, so it suits kitchens, food production, workshops and car parks.

How do I know which size I need?

The size is the width of the squeegee frame, which is usually marked on it or listed in the machine's parts list. The 750 mm set fits most 430 and 510 mm walk-behind machines; the 850 mm set fits larger walk-behind and compact ride-on machines.

Why is my machine leaving streaks or wet lines?

Usually the rear blade edge is worn, nicked or has grit stuck on it, or the squeegee height is wrong. Clean the blade, turn the rear blade to a fresh edge and check the blade bends back evenly; if the lines remain, check the vacuum hose for blockages.

How many times can I turn the rear blade?

The rear blade has four working edges: turn it top to bottom, then end to end. The front blade is slotted and is normally replaced rather than turned.

Does the set include both blades?

Yes. Each set contains one slotted front blade and one solid rear blade, cut to length and punched for the original fixings.

Can I keep spare blades in stock?

Yes. Keep them flat in their sleeve, away from sunlight and electric motors, which give off ozone. Gum rubber keeps about three years and polyurethane about five.