Manufacturer: Scrubtec

Disc brush 430 mm, Hard

430 mm disc scrubbing brush with Hard polypropylene bristles and a quick-fit hub. It clips straight onto Scrubtec scrubber dryers and single-disc machines for daily scrubbing of hard floors, with an even bristle pattern that wears flat.
SKU: ST-BR430HARD
In stock
Availability: In stock
Price
$73.00

Description

Overview

The brush does the actual cleaning on a disc scrubber dryer. Over time the bristles wear short and splay, so they stop reaching into textured floors and grout lines, and the machine needs more passes for the same result. Replacing worn brushes is one of the cheapest ways to bring a machine back to its original performance.

These disc brushes are made to the original dimensions, with a moulded polypropylene back and a quick-fit hub that locks on without tools.

Choosing the grade

The medium grade uses finer bristles that scrub well without scratching. It suits vinyl, linoleum, safety flooring, sealed concrete and glazed tiles, and it is the right everyday brush for most commercial buildings.

The hard grade uses thicker, stiffer bristles for rough and heavily soiled floors such as bare concrete, quarry tiles and textured anti-slip surfaces in warehouses, kitchens and workshops. Don't use it on soft or polished finishes.

  • Medium: vinyl, safety flooring, sealed floors, tiles
  • Hard: bare concrete, quarry tiles, anti-slip floors
  • Pad drivers and pads for polishing and stripping
  • Colour-coded bristles show the grade at a glance

Choosing the size

Match the brush diameter to the brush deck of your machine. The 430 mm brush fits 17-inch single-disc machines and compact scrubber dryers. The 510 mm brush fits 20-inch machines and the larger walk-behind scrubber dryers. A brush that is too large will rub the skirt and overload the brush motor.

Design and construction

Bristles are set in tight tufts in a pattern that sweeps solution outwards and wears flat, rather than leaving a ridge. The back is moulded in one piece, so it doesn't warp in hot solution, and splash holes let solution reach the floor through the brush on machines that feed from the centre.

The hub uses the three-lug quick-fit system. Lift the deck, place the brush under it and lower the deck, or turn the brush until it clicks in place.

Use and care

Never run the brush on a dry floor; always put down solution first, as dry scrubbing overheats the bristles and leaves marks. Rinse the brush at the end of each shift, remove string and hair from the hub, and store it flat or hanging from the hub so the bristles don't take a set.

Replace the brush when the bristles are worn down to about 15 mm, or when the brush no longer cleans the floor evenly.

  • Rinse after every shift
  • Store flat or hanging, never resting on the bristles
  • Swap brushes on twin-disc decks together

Ordering

Each brush is packed in its own carton with the size and grade on the label. Fleet operators often order a spare set per machine, and trade accounts can reorder with quick order by part code.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Diameter (mm) 430
Type Disc brush
Grade Hard
General
Brand Scrubtec
Product type Disc scrubbing brush
Application Scrubber dryers and single-disc floor machines
Country of manufacture Italy
Warranty 6 months against manufacturing defects
Machine size 17 in / 430 mm deck
Suitable floors Bare concrete, quarry tiles, anti-slip floors
Performance
Maximum speed (rpm) 300
Operating temperature (°C) +5 to +60
Replace when bristles reach (mm) 15
Dimensions and weight
Bristle length (mm) 28
Overall height (mm) 75
Net weight (kg) 2.2
Packed weight (kg) 2.7
Materials and construction
Bristle material Polypropylene (PPL)
Bristle diameter (mm) 0.9
Bristle colour Black
Brush back material Moulded polypropylene
Hub type Three-lug quick-fit clutch plate
Compliance and safety
RoHS compliant Yes
REACH compliant Yes
Packaging and ordering
Pack quantity 1 brush
Packaging Labelled carton
Barcode type EAN-13
Storage temperature (°C) 0 to +40

FAQs

Should I choose the medium or the hard brush?

Choose medium for vinyl, linoleum, safety flooring, sealed concrete and tiles; it is the everyday brush for most buildings. Choose hard only for rough, heavily soiled floors such as bare concrete, quarry tiles and anti-slip surfaces, as it can scratch softer finishes.

Which size fits my machine?

The 430 mm brush fits 17-inch single-disc machines and compact scrubber dryers; the 510 mm brush fits 20-inch machines and larger walk-behind scrubber dryers. Measure the old brush across the bristles, or check the machine's parts list.

How do I fit the brush?

With the machine switched off, place the brush under the raised deck and lower the deck onto it, or turn the brush by hand until the three lugs click into the clutch plate. Many machines also have an automatic brush fitting function; see the machine's manual.

When should the brush be replaced?

Replace it when the bristles have worn down to about 15 mm, when they are splayed or melted, or when the brush no longer cleans evenly across its width. On twin-disc machines, replace both brushes together.

Can I use the brush for polishing?

No. For polishing, buffing or stripping, fit a pad driver with the right floor pad instead. A brush won't give a polished finish and can dull a polished floor.

Can I use these brushes on another brand of machine?

They fit machines that use the three-lug quick-fit clutch plate of the same diameter. Check the hub on your machine against the photo and dimensions before ordering, or ask us with the machine model.