FAQs
Should I choose gum rubber or polyurethane blades?
Gum rubber is softer and gives the driest result on grouted, textured or uneven floors. Polyurethane lasts much longer and resists oil and grease, so it suits kitchens, food production, workshops and car parks.
How do I know which size I need?
The size is the width of the squeegee frame, which is usually marked on it or listed in the machine's parts list. The 750 mm set fits most 430 and 510 mm walk-behind machines; the 850 mm set fits larger walk-behind and compact ride-on machines.
Why is my machine leaving streaks or wet lines?
Usually the rear blade edge is worn, nicked or has grit stuck on it, or the squeegee height is wrong. Clean the blade, turn the rear blade to a fresh edge and check the blade bends back evenly; if the lines remain, check the vacuum hose for blockages.
How many times can I turn the rear blade?
The rear blade has four working edges: turn it top to bottom, then end to end. The front blade is slotted and is normally replaced rather than turned.
Does the set include both blades?
Yes. Each set contains one slotted front blade and one solid rear blade, cut to length and punched for the original fixings.
Can I keep spare blades in stock?
Yes. Keep them flat in their sleeve, away from sunlight and electric motors, which give off ozone. Gum rubber keeps about three years and polyurethane about five.