Manufacturer: Scrubtec

Castor wheel 100 mm

100 mm swivel castor with a non-marking grey tyre and top-plate fixing. A direct replacement for the castors on Scrubtec scrubber dryers, vacuums and cleaning trolleys that rolls quietly and leaves no marks on clean floors.
SKU: ST-CW100
In stock
Availability: In stock
Price
$12.00

Fits these machines

Description

Overview

Castors take a lot of punishment on cleaning machines. They run through water and detergent every day, bump over thresholds and lift kerbs, and carry the weight of full tanks. A worn or seized castor makes a machine hard to steer, drags the squeegee off line and leaves black marks on the floor you have just cleaned.

This swivel castor is a direct replacement for the original, with the same top plate and hole pattern so it bolts straight on.

Where to use it

The castors fit Scrubtec walk-behind scrubber dryers, tub and wet-and-dry vacuums, and cleaning and housekeeping trolleys. They also suit general equipment that is moved by hand indoors, such as tool trolleys and stands, where a non-marking wheel matters.

  • 75 mm: vacuums and light trolleys
  • 100 mm: scrubber dryer squeegee and rear castors, trolleys
  • 125 mm: heavier machines and loaded trolleys
  • Indoor use on hard floors

Design and construction

The tyre is grey thermoplastic rubber, moulded onto a polypropylene wheel centre. It is soft enough to roll quietly and grip smooth floors, yet doesn't leave marks or pick up grit. The wheel runs on a roller bearing, and the swivel head has a double ball race so it turns easily under load.

The fork and top plate are zinc-plated pressed steel, and the bearings are greased for life. All metal parts resist the detergents used in floor cleaning, but should be rinsed off after wet work.

Choosing the size

Replace like for like: measure the wheel diameter and the top plate hole centres of the old castor, and compare them with the specifications. A larger castor changes the height of the machine, which on a scrubber dryer affects the squeegee and brush pressure. Check the load capacity too; with four castors, allow for the full weight of the machine with tanks filled.

Fitting and care

Drain the tanks and support the machine securely before removing the old castor. Fit the new one with all four bolts and lock nuts or thread-locking compound, as vibration can loosen fixings over time.

Remove hair and string from the axle and swivel weekly, and rinse off detergent residue. Replace a castor when the tyre is flat-spotted, cracked or comes away from the wheel centre.

Check the swivel at the same time. A swivel head that wobbles or binds has worn ball races, and the castor should be replaced even if the tyre still looks good. On scrubber dryers, replace the castors either side of the squeegee as a pair so it stays level.

Ordering

Castors are packed singly with the size and part code on the label. Order them in fours for trolleys, or keep a few spares for the most common size in your fleet. Trade accounts can reorder by part code with quick order.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Diameter (mm) 100
Type Castor
General
Brand Scrubtec
Product type Swivel castor, top plate
Application Scrubber dryers, vacuums and cleaning trolleys
Country of manufacture Germany
Warranty 12 months against manufacturing defects
Brake No
Performance
Load capacity per castor (kg) 70
Maximum speed (km/h) 4
Operating temperature (°C) -20 to +60
Non-marking Yes
Dimensions and weight
Wheel width (mm) 32
Overall height (mm) 128
Top plate (mm) 85 × 65
Bolt hole centres (mm) 65 × 45
Fixing bolts 4 × M8
Net weight (kg) 0.45
Packed weight (kg) 0.51
Materials and construction
Tyre material Grey thermoplastic rubber
Tyre hardness (Shore A) 70
Wheel centre material Polypropylene
Wheel bearing Roller bearing
Swivel head Double ball race
Fork material Zinc-plated pressed steel
Compliance and safety
Standards EN 12532
RoHS compliant Yes
Packaging and ordering
Pack quantity 1 castor
Barcode type EAN-13
Storage temperature (°C) 0 to +40

FAQs

How do I know which castor fits my machine?

Measure the wheel diameter and the distance between the fixing holes on the top plate of the old castor, then compare them with the specifications on this page. The machine's parts list also gives the castor size.

Will the tyres mark my floors?

No. The grey thermoplastic rubber tyre is non-marking on vinyl, tiles, sealed concrete and similar hard floors. Keep the tyres clean, as grit picked up on a tyre can scratch soft floors.

Are bolts included?

No. Use four bolts of the size shown in the specifications, with lock nuts or thread-locking compound. Our fasteners range includes suitable bolts, nuts and washers.

How much weight can the castors carry?

The load capacity per castor is shown in the specifications. To size them, divide the full working weight of the machine or trolley by the number of castors, and allow a margin for kerbs and uneven floors.

Can I use these castors outdoors?

They are designed for indoor use on hard floors. They will cope with short trips across a car park or yard, but rough ground wears the tyres quickly and puts shock loads on the bearings.

Do you sell braked castors?

This range is non-braked, as fitted to the machines. For trolleys that need to stay put, use the machine's parking brake or wheel chocks, or ask us about braked castors.