FAQs
Will this bearing replace one from another maker?
Yes, if the code matches. Bearing codes such as 6204 follow ISO dimensions, so bore, outside diameter and width are the same from every maker. Suffixes for seals and clearance can differ, so check that 2RS sealed and normal clearance suit your application.
What is the difference between 2RS and ZZ?
2RS bearings have rubber contact seals, which keep out dust and water better. ZZ bearings have metal shields that don't touch the inner ring, so they run with less friction at very high speeds but protect less against water. This range is 2RS.
Do sealed bearings need greasing?
No. They are filled with grease for life and can't be regreased. Don't wash them in solvent, which removes the grease past the seals.
How do I measure a bearing without a code?
Measure the bore, the outside diameter and the width with a vernier caliper, in millimetres, and compare them with the dimensions in the specifications on each product.
Why did my new bearing fail quickly?
The most common causes are damage during fitting, such as hammering on the outer ring when fitting to a shaft, a worn shaft or housing, misalignment, or contamination. Fit with a sleeve on the correct ring and check the shaft and housing first.
Do you sell these in boxes for workshop stock?
Each bearing is packed singly so it stays clean until fitting. Order the quantity you need; trade accounts can save common sizes to a list and reorder them quickly.