Manufacturer: Spatterline

Auto-darkening welding helmet, respirator ready

An auto-darkening welding helmet, respirator ready, with a variable dark shade of 9 to 13, sensitivity and delay controls and a grind mode. Four arc sensors pick up low-current TIG, so you can set up with the helmet down and keep both hands on the job.
SKU: SP-AHRESPIRATORREADY
In stock
Availability: In stock
Price
$369.00

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $350.55
50–199 $332.10
200+ $313.65

Description

Overview

An auto-darkening helmet lets you see the joint clearly before you strike, then switches to a dark shade in a fraction of a millisecond when the arc starts. There is no need to nod the helmet down, which means better starts, fewer misplaced tacks and less neck strain over a working day.

This Spatterline helmet suits MIG, TIG, stick and plasma work. Shade, sensitivity and delay are set with dials on the filter, and a grind mode holds the filter in its light state so the helmet works as a face shield.

Key features

  • Shade 4 light, 9–13 dark, grind mode
  • Four sensors, sensitivity and delay control
  • Replaceable battery with solar assist
  • Certified to AS/NZS 1338.1

Choosing the right version

All three versions share the same filter performance and controls. The difference is the view and how the helmet works with other equipment.

  • Standard view: light, compact and good value for general fabrication
  • True colour, side view: clearer colours and side windows for wider awareness
  • Respirator ready: works with a powered air-purifying respirator for fume-heavy work
  • All versions: shade 9 to 13, grind mode and four sensors

Setting the shade

Choose the shade by process and current. As a guide, use shade 9 to 10 for low-current TIG and MIG on thin sheet, shade 10 to 11 for most MIG and stick welding, and shade 12 to 13 for high-current MIG, gouging and heavy stick work. Start darker and go lighter until the pool is clear without glare.

Turn sensitivity up for low-current TIG or when part of the arc is hidden, and down if other welders nearby trigger your filter. A longer delay keeps the filter dark while the hot metal cools after a high-current weld.

Fit and comfort

The ratchet headgear adjusts for size and for the height and tilt of the shell, and the sweatband is replaceable. Spend a minute setting the headgear so the helmet balances on your head rather than pressing on the forehead; it makes a real difference over a full shift. The shell is light and shaped to deflect sparks away from the neck and to sit close to the face without touching it.

Care and maintenance

Replace the outer cover lens as soon as spatter makes the view hazy, and change the inner lens when it scratches. Clean the filter with a soft cloth and never with solvents. The battery is replaceable and the solar cells extend its life; if the filter flickers or will not darken, change the battery before anything else.

Store the helmet away from direct sunlight and heat, and keep it in a bag when not in use to protect the filter and lenses.

Compliance and ordering

The filter meets EN 379 and the helmet meets EN 175 as well as AS/NZS 1338.1, and it carries CE and UKCA marking as personal protective equipment. Cover lenses are sold in packs for regular replacement. Trade customers can order helmets and consumable lenses on account for a whole team.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type respirator ready
Standard AS/NZS 1338.1
General
Brand Spatterline
Product type Auto-darkening welding helmet
Application MIG, TIG, stick and plasma; grinding
Country of manufacture China
Warranty 2 years on the filter
Performance
Light state shade DIN 4
Dark state shade DIN 9–13, variable
Switching time (s) 1/25,000
Dark to light delay (s) 0.1–1.0
Arc sensors 4
Lowest TIG current (A) 5 (DC)
Optical class (EN 379) 1/1/1/1
Viewing area (mm) 100 × 62
Operating temperature (°C) -10 to +55
Electrical
Battery CR2450 lithium, replaceable
Battery life (h) About 3,000
Solar assist Yes
Dimensions and weight
Net weight (kg) 0.72
Filter cartridge size (mm) 114 × 133
Materials and construction
Shell material Heat and impact-resistant nylon
Headgear Ratchet, adjustable, replaceable sweatband
Cover lenses Polycarbonate, inside and outside, replaceable
Compliance and safety
Standards EN 379, EN 175, AS/NZS 1338.1
CE / UKCA marked Yes
PAPR compatible Yes, with Spatterline air hose and face seal
Packaging and ordering
Pack quantity 1
Spare cover lenses Packs of 10
Storage temperature (°C) -20 to +70
Barcode type EAN-13

FAQs

Which shade should I use?

Use shade 9 to 10 for low-current TIG and light MIG, 10 to 11 for most MIG and stick work, and 12 to 13 for high-current work and gouging. If the weld pool looks too bright or you see after-images, go darker.

Is it suitable for low-amp TIG welding?

Yes. The four sensors and the sensitivity control let the filter respond to TIG arcs from about 5 A. Turn sensitivity up and make sure your hand or the torch does not hide all the sensors.

What does the respirator-ready version add?

It has a face seal and a connection for a powered air-purifying respirator, so filtered air flows across your face. It suits stainless, galvanised and long shifts in poorly ventilated areas, where fume control is essential.

Do I need to switch it on and off?

No. The filter switches on automatically when it detects light and switches off after a period without use. The solar cells help keep the battery charged.

How often should I change the cover lenses?

Change the outer lens whenever spatter or haze makes the view unclear; for daily MIG welding that can be every week or two. A clean lens also helps the sensors respond reliably. Spare lenses are sold in packs of 10.

Can I order helmets for a whole team?

Yes. Trade customers can order several helmets and spare lenses on one order, buy on account, and save the order to reorder consumables later. See the delivery page for shipping options.