FAQs
Do I need the AC/DC model?
Only if you weld aluminium or magnesium. Steel, stainless, copper and titanium are all welded on DC, so the DC model covers them at a lower weight. If aluminium work is likely in future, the AC/DC model saves buying a second machine.
Will the high-frequency start interfere with other equipment?
HF start can disturb nearby electronics if leads are long or poorly routed. Keep torch and earth leads short and close together, earth the workpiece well and keep the machine away from computers and CNC controls. Lift start is available where HF is not allowed.
Which tungsten should I use?
A 2% lanthanated tungsten works well for both AC and DC and is a good all-round choice. Use 1.6 mm up to about 120 A and 2.4 mm above that. Grind DC tungstens to a point and leave a small flat or ball on AC.
What gas and flow rate do I need?
Use pure argon for all TIG welding. A flow of 6 to 10 L/min suits most work; increase it slightly with large cups or in a draught. Our argon regulator with flowmeter fits the gas hose supplied.
Can I fit a water-cooled torch?
The 315 A model is ready for a separate water cooler and water-cooled torch, which is worth it for long runs above about 200 A. The 200 A models are designed for gas-cooled torches.
Can I order a foot pedal with it?
Yes, the foot pedal is sold separately and plugs straight into the front control socket. Trade customers can add it, filler rods and a regulator to the same order. See the delivery page for shipping options.