Manufacturer: Forgeline

Through bolt M8 × 75 mm

Forgeline M8 × 75 mm through bolt: a steel wedge anchor with nut and washer for heavy-duty fixings into concrete. It sets as you tighten, takes load straight away and needs no resin or curing time. Ideal for racking, machinery, steelwork and handrails, in packs of 25.
SKU: FL-TBM875
In stock
Availability: In stock
Price
$0.55

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $0.52
50–199 $0.50
200+ $0.47

Sold in bolts. Quantities round up to full packs.

Description

Overview

A through bolt, also called a wedge anchor, is the quickest way to make a strong mechanical fixing into concrete. The anchor is pushed through the fixture into a drilled hole. As the nut is tightened, a cone at the tip draws up into a steel expansion clip, which presses hard against the sides of the hole and locks the anchor in place.

These Forgeline anchors are made from zinc plated steel and come complete with a hex nut and a washer, so each one is ready to fit straight from the box. Because the anchor takes load as soon as the nut is tightened, equipment can be used the same day with no waiting for resin to cure.

Sold in packs of 25 bolts.

Where to use it

Through bolts suit medium and heavy fixings into solid concrete:

  • Pallet racking base plates and column guards
  • Machinery, workbenches and compressor feet
  • Steel brackets, ledgers and support frames
  • Handrails, barriers and gate posts
  • Cable tray and pipe support stands

Design and construction

The bolt has a rolled metric thread at the top and a machined cone at the bottom. The expansion clip is held in place on a reduced section of the shank, so it cannot slide off during handling. Because the anchor passes through the fixture, the holes in the item and the concrete are drilled in one go and always line up.

Once set, the anchor cannot be removed, but the nut can be taken off to lift the fixture and refitted later.

Choosing the right size

The anchor diameter equals the drill size: an M10 anchor needs a 10 mm hole. Choose the diameter from the load, then the length from the thickness of the item being fixed. The maximum fixture thickness, minimum hole depth and suggested working loads for each size are in the specifications.

These anchors are for non-cracked concrete of grade C20/25 or stronger. For brick, block or hollow materials use resin anchors or frame anchors instead. For safety-critical or overhead fixings, use an anchor with a European Technical Assessment and follow the engineer's design.

Installation

Drill a hole of the anchor diameter to at least the minimum depth, using a sharp SDS bit and hammer action. Clean the hole thoroughly with a blow pump and brush; dust left in the hole is the main cause of poor holding. Place the fixture, tap the anchor through until the washer touches it, then tighten the nut to the installation torque with a torque wrench.

Keep to the minimum edge distance, spacing and concrete thickness, otherwise the concrete can crack as the anchor expands.

Packaging and ordering

Anchors are boxed in 25s with the nut and washer fitted. Racking installers and maintenance teams often order the anchors with SDS bits in the matching size; trade customers can add both in one quick order, and tier prices apply to larger quantities.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Size M8 × 75
Material Steel, zinc plated
General
Brand Forgeline
Product type Wedge anchor (through bolt) with nut and washer
Application Medium and heavy fixings into solid concrete
Country of manufacture Poland
Warranty 12 months against manufacturing defects
Performance
Installation torque (Nm) 15
Recommended tensile load, concrete C20/25 (kN) 2.4
Recommended shear load, concrete C20/25 (kN) 3.0
Operating temperature (°C) -40 to +150
Removable No; the nut can be removed to lift the fixture
Dimensions and weight
Drill diameter (mm) 8
Minimum drill hole depth (mm) 60
Maximum fixture thickness (mm) 10
Width across flats (mm) 13
Minimum edge distance (mm) 65
Minimum concrete thickness (mm) 100
Packed weight (kg) 0.95
Materials and construction
Expansion clip Steel, zinc plated
Suitable base materials Non-cracked concrete C20/25 to C50/60
Compliance and safety
Standards Manufacturer load data; no ETA
CE / UKCA marked No
RoHS compliant Yes
Packaging and ordering
Supplied with Hex nut and flat washer
Pack quantity 25 anchors with nuts and washers
Barcode type EAN-13 on pack label
Storage temperature (°C) 5 to 30, dry

Documents

FAQs

What size hole do I drill?

The drill diameter is the same as the anchor size: 8 mm for M8, 10 mm for M10 and 12 mm for M12. Drill to at least the minimum hole depth in the specifications and clean out all the dust.

Can I use through bolts in brick or block?

No. They need solid concrete to expand against and can split brick and block. Use frame anchors or a resin anchor system in masonry.

How tight should the nut be?

Tighten to the installation torque listed for each size, using a torque wrench. Too little torque leaves the clip unset; too much can crack the concrete or strip the thread.

Can I remove a through bolt later?

Once set, the anchor stays in the concrete. You can take the nut and washer off to lift the fixture, or cut the anchor flush with the floor if it is no longer needed.

Are these anchors approved for safety-critical fixings?

These anchors come with manufacturer load data but no European Technical Assessment. For overhead, life-safety or designed structural fixings, use an ETA-approved anchor specified by an engineer.

Can I use them outside?

The zinc plating suits indoor and sheltered use. Outdoors or in wet areas the anchor will corrode over time, so use a stainless steel anchor for exposed fixings.