Overview
The Torqline 36 V SDS hammer drill is a heavy-duty cordless tool for drilling and light chiselling in concrete and masonry. It brings mains-level performance to sites without power and to work at height where cables are a hazard.
The kit includes the tool, two 36 V 4.0 Ah lithium-ion batteries, a fast charger, an auxiliary handle with depth stop and a carry case. Price is on request; trade customers can ask for a quote from their account.
Applications
It suits electricians, M&E contractors, groundworkers and facilities teams.
- Anchor holes in concrete from 6 to 28 mm
- Through-holes for cables and pipes in brick and block
- Fixing racking and steelwork to concrete floors
- Chasing and removing tiles in chisel mode
- Repeated drilling for containment and ceiling fixings
Performance and design
The brushless motor and electro-pneumatic hammer deliver 3.5 J of impact energy at up to 4,500 blows per minute. That is enough for fast drilling with bits from 10 to 20 mm and occasional larger holes up to 28 mm.
An electronic kickback cut-off senses if the tool starts to twist when a bit jams and stops it at once. An anti-vibration handle and damped hammer mechanism reduce the vibration that reaches the user. The SDS-plus holder takes bits and chisels without a key.
Batteries and run time
Each 4.0 Ah battery drills many anchor holes in concrete on one charge, and the second battery charges while the first is in use. The fast charger fills a battery in about 70 minutes. A fuel gauge on each battery shows the remaining charge.
Choosing the mode
Use hammer drilling mode for concrete, brick, block and stone. Use rotary-only mode for timber, steel and tiles, with the right bit and an SDS chuck adaptor where needed, and for starting holes in hollow block. Use chisel mode with the rotation stopped for chasing, removing tiles and breaking out small areas of render.
Set the chisel angle before locking the mode, so the chisel sits the way you want to work. Let the tool's weight provide most of the feed force; pushing harder reduces impact efficiency and adds vibration.
For overhead work, keep the tool close to your body and use the depth stop so you can watch the gauge rather than the bit. A dust cap or on-tool extraction keeps dust out of your eyes. Plan drilling runs so the batteries swap at natural breaks, and keep the charger in a dry place away from the working area.
Safe use and compliance
The tool is CE and UKCA marked and tested to EN 62841-1 and EN 62841-2-6. Always fit the auxiliary handle and hold the tool with both hands. Wear eye and hearing protection and a dust mask, and use dust extraction where silica dust is produced.
Check vibration exposure for long jobs using the declared vibration value and plan breaks to stay within daily limits. Have the tool serviced if hammer action weakens; the case and batteries are covered by the warranty against manufacturing defects.
Demo product: invented for the Cartenvo B2B demo store.