Overview
The Torqline 6-piece screwdriver set covers the slotted and Pozidriv sizes used most in fixing, assembly and maintenance. Each driver has a chrome vanadium blade, a blackened magnetic tip and a two-material handle with a hard core and a soft grip.
The drivers come in a wall rack that can be screwed to a board or stood on a bench, so you can see at a glance if one is missing.
Where to use it
It suits joiners, maintenance teams, installers and workshops.
- Pozi countersunk wood screws in hinges and fittings
- Slotted terminals on older fittings and machinery
- Panel screws, covers and access hatches
- Furniture and shelving assembly
- Light prying of lids is not recommended
Design and construction
Blades are chrome vanadium steel, hardened through and tempered so they resist twisting under load. The tips are precision ground to ISO 2380 for slotted and ISO 8764 for Pozidriv, which gives a snug fit and less cam-out. A black phosphate finish on the tip adds grip and the magnetic tip holds the screw for one-handed starting.
Larger drivers have a hex bolster below the handle, so you can add turning force with a spanner when a screw is tight. The handles are oil-resistant and marked with the tip size on the end cap.
Which set to choose
The 6-piece set holds slotted 3, 5.5 and 6.5 mm and Pozidriv PZ0, PZ1 and PZ2: the core sizes for most fixing work. The 10-piece set adds slotted 2.5 and 8 mm, a Pozidriv PZ3 and a stubby PZ2 for tight spaces.
Pozidriv and Phillips are not the same. Pozidriv screws are marked with four small lines between the cross; a Phillips driver will slip in them and damage the head.
Getting a good fit
Most stripped screw heads come from the wrong tip size, not a weak screw. A slotted blade should fill the slot in width and thickness, so it neither rocks nor sticks out past the head. A Pozidriv tip should sit deep in the recess without wobbling before you turn it.
Keep tips clean of paint and debris, and replace a driver once its tip is rounded, as a worn tip will damage every screw it touches. When driving long screws into hardwood, drill a pilot hole first and rub a little wax on the thread.
For high-volume screw driving, a cordless drill driver with a matching bit saves time, but a hand screwdriver gives better feel for the final turn on hinges, fittings and small brass screws. Many teams keep the 6-piece set beside the drill driver for exactly that reason, and for screws that sit where a drill will not reach.
Use and care
Match the tip to the screw head and keep the driver in line with the screw. Push firmly while turning to stop cam-out. These drivers are not insulated, so never use them on live electrical parts; use VDE screwdrivers for that.
Wipe the blades and return them to the rack. Trade customers can reorder sets along with screws and fixings through quick order.
Demo product: invented for the Cartenvo B2B demo store.