Manufacturer: Forgeline

Nylon wall plug 5 mm

Forgeline 5 mm nylon wall plug for fixing with wood screws into brick, block, concrete and stone. Four-way expansion and anti-rotation fins give a firm hold, and the collar-free body can be set flush or deeper. An everyday plug for fitters, electricians and facilities teams, in packs of 100.
SKU: FL-WP5
In stock
Availability: In stock
Price
$0.50

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $0.48
50–199 $0.45
200+ $0.42

Sold in plugs. Quantities round up to full packs.

Description

Overview

The nylon wall plug is the most used fixing on any site. Drill a hole, push the plug in, and a wood screw driven through the fixture spreads the plug against the sides of the hole. These Forgeline plugs are moulded from tough polyamide that stays flexible in cold weather and does not crack when the screw is driven.

Each plug splits into four as it expands, so it grips evenly all round the hole. Fins along the body stop it turning while the screw is driven. The result is a fixing that tightens properly instead of spinning, even when a power driver is used.

Sold in packs of 100 plugs.

Where to use it

Use these plugs for light and medium fixings into solid masonry:

  • Shelving brackets, cupboards and mirrors
  • Cable clips, conduit saddles and small enclosures
  • Signs, notice boards and dispensers
  • Curtain tracks, coat hooks and handrails for light duty
  • Pipe clips and small fittings

Design and construction

The plug has no collar, so it can be pushed in flush with the surface or set below plaster into the masonry behind. That matters on rendered or plastered walls, where the plaster alone cannot carry load.

The plug length rises with the diameter, from 25 mm for the 5 mm size to 50 mm for the 10 mm size. The bore is shaped so the screw threads cut into the plastic and pull the plug tight as it expands.

Choosing the right size

Pick the plug to suit the screw. A 5 mm plug takes 3.0 to 4.0 mm screws, a 6 mm plug 3.5 to 5.0 mm, an 8 mm plug 4.5 to 6.0 mm, and a 10 mm plug 6.0 to 8.0 mm screws. The screw should be long enough to pass through the fixture and the full length of the plug, plus at least one screw diameter.

For heavy loads such as wall cupboards full of stock, use the larger sizes and more fixings. For hollow walls or plasterboard, use cavity fixings instead; these plugs need solid material to grip.

Installation

Drill a hole the same diameter as the plug, about 10 mm deeper than the plug length, using hammer action in concrete and hard brick. Blow or brush out the dust, push the plug in until it is flush with or below the surface, then fix through the item with the screw.

Keep holes at least 50 mm from edges and corners of brickwork and away from mortar joints where you can. A hole that is too big or a crumbling joint is the usual cause of a plug that spins.

Packaging and ordering

Plugs come in bags of 100 with a size and barcode label, ready for van stock or stores bins. Order them alongside wood screws and masonry bits; trade customers can put all three in one quick order and see their tier prices for larger quantities.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Size 5
Material Nylon
Colour Grey
General
Brand Forgeline
Product type Universal expansion wall plug
Application Light and medium fixings into solid masonry
Country of manufacture Poland
Warranty 12 months against manufacturing defects
Performance
Recommended tensile load, concrete C20/25 (kN) 0.15
Installation temperature (°C) -5 to +40
Operating temperature (°C) -40 to +80
Dimensions and weight
Plug length (mm) 25
Drill diameter (mm) 5
Minimum drill hole depth (mm) 35
Screw diameter range (mm) 3.0 to 4.0
Minimum edge distance (mm) 50
Weight per 100 pieces (kg) 0.04
Packed weight (kg) 0.05
Materials and construction
Nylon grade Polyamide 6
Expansion Four-way split with anti-rotation fins
Collar None; can be set flush or below the surface
Suitable base materials Concrete, solid brick, solid block, natural stone
Compliance and safety
Standards Manufacturer load data; not for safety-critical fixings
CE / UKCA marked Not required for this product
RoHS compliant Yes
Packaging and ordering
Pack quantity 100 plugs
Barcode type EAN-13 on pack label
Storage temperature (°C) 5 to 30, dry, out of direct sunlight

Documents

FAQs

What size drill bit do I need?

Use a masonry bit the same diameter as the plug: a 6 mm bit for a 6 mm plug, and so on. Drill about 10 mm deeper than the plug length so dust has somewhere to go.

Which screws should I use with these plugs?

Standard wood screws in the diameter range listed for each plug. For example, a 4.0 mm screw suits a 6 mm plug and a 5.0 mm screw suits an 8 mm plug.

Can I use them in plasterboard?

They are designed for solid materials and will not hold reliably in plasterboard. Use a cavity fixing made for plasterboard, or screw into a stud behind the board.

Why does my plug spin in the hole?

The hole is usually too large, often because the bit wandered or the hole was drilled into a soft mortar joint. Drill a fresh hole in sound brick or use the next plug size up.

How deep should the plug sit on a plastered wall?

Push it in past the plaster so it expands in the masonry behind. Because these plugs have no collar, they can be tapped below the surface.

Can I use these plugs outdoors?

Yes, the nylon is not affected by weather once installed. Use screws with an exterior or stainless finish so the fixing does not rust.