Manufacturer: Lumenford

LED GLS lamp 9 W B22, pack of 10

Lumenford 9 W frosted LED GLS lamps with a B22 cap, in packs of 10. Warm white 2700 K light that looks like a traditional bulb, using a fraction of the energy, for landlords, hotels, facilities teams and maintenance stores that replace lamps in quantity.
SKU: LF-GL9B22
In stock
Availability: In stock
Price
$15.50

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $14.72
50–199 $13.95
200+ $13.18

Description

Overview

The classic pear-shaped household bulb, rebuilt with LEDs. The frosted cover gives a soft, even light with no visible LED points, and the warm white colour matches the incandescent and halogen lamps it replaces. The lamp lights instantly at full brightness and runs cool to the touch compared with an old filament bulb.

The 6 W lamp gives around 470 lumens, about the same as a 40 W incandescent bulb. The 9 W lamp gives around 806 lumens, about the same as a 60 W bulb. Both last around 15,000 hours, which is roughly fifteen times as long as the bulbs they replace.

Where to use them

GLS lamps fit most everyday light fittings with a standard cap.

  • Pendants, table lamps and ceiling fittings
  • Rental properties and student accommodation
  • Hotel rooms, corridors and communal areas
  • Offices, staff rooms and welfare units
  • Maintenance stock for multi-site estates

Choosing cap and power

Check the cap on the lamp you are replacing. E27 is the large screw cap, common on table lamps and fittings from mainland Europe. B22 is the bayonet cap with two side pins, still the most common cap in UK pendants. The two are not interchangeable, so stocking both is common for maintenance teams.

Choose 6 W where a gentle light is wanted, such as bedside lamps, corridors and stairwells. Choose 9 W for main room lighting, kitchens and work areas. Check that the fitting is open or ventilated; LED lamps last longest when their heat can escape.

Design and construction

Inside the frosted polycarbonate cover sits an LED board on an aluminium heat sink, with a small driver in the neck of the lamp. Polycarbonate does not shatter like glass, which is useful in communal areas and when lamps are changed from a ladder. The lamp contains no mercury and no lead.

The driver is designed to keep the output steady across normal supply variations, and the lamp can be switched on and off thousands of times without shortening its life.

Use and care

Switch off and let the old lamp cool before removing it. Fit the new lamp firmly but do not overtighten a screw cap. These lamps are not dimmable; on a dimmer circuit they may flicker or buzz, so use them only on standard switches.

Dispose of old LED lamps through a waste electrical collection point, not with general waste.

  • Not suitable for fully enclosed fittings with no ventilation
  • Suitable for indoor use in dry locations
  • Keep a few spares of each cap on every site

Packaging and ordering

Lamps are sold in packs of 10, each lamp in its own small carton inside an outer box, so they store neatly and individual lamps can be issued to site. Facilities teams can mix caps and wattages in one order and save the list for regular restocking. Trade tier prices apply to larger quantities.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Power (W) 9
Colour temperature 2700 K
Cap B22
IP rating IP20
General
Brand Lumenford
Product type LED GLS lamp, frosted
Application General indoor lighting
Country of manufacture China
Warranty 2 years
Performance
Luminous flux (lm) 806
Incandescent equivalent (W) 60
Colour rendering (CRI) > 80
Beam angle (°) 200
Rated life (hours) 15,000
Switching cycles 15,000
Warm-up time Instant full brightness
Operating temperature (°C) -20 to +40
Electrical
Input voltage (V) 220 to 240 AC, 50/60 Hz
Dimmable No
Power factor > 0.5
Dimensions and weight
Lamp dimensions (Ø × length, mm) 60 × 106
Net weight (kg) 0.45
Packed weight (kg) 0.7
Materials and construction
Bulb Frosted polycarbonate
Mercury content None
Compliance and safety
Energy class F
Standards EN 62560, EN 62612
CE / UKCA marked Yes
RoHS compliant Yes
Packaging and ordering
Pack quantity 10 lamps
Barcode type EAN-13

FAQs

What is the difference between E27 and B22?

E27 is a 27 mm screw cap and B22 is a 22 mm bayonet cap with two pins. Check the old lamp or the fitting before ordering, as one will not fit the other's lamp holder.

Can I use these lamps with a dimmer switch?

No. These lamps are not dimmable, and on a dimmer they may flicker, buzz or fail early. Use dimmable LED lamps with a compatible dimmer instead.

Which wattage replaces a 60 W bulb?

The 9 W lamp gives around 806 lumens, the same as a traditional 60 W bulb. The 6 W lamp replaces a 40 W bulb.

Can I use them in enclosed fittings?

They can be used in fittings with some ventilation. In fully sealed fittings the heat builds up and shortens the life of the lamp.

Are they suitable for bathrooms?

They can be used in a bathroom fitting that has the correct IP rating for its zone. The lamp itself has no IP rating beyond the fitting it is in.

Can I buy single lamps?

The lamps are sold in packs of 10 only. Each lamp is individually boxed inside the pack, so they are easy to hand out to sites or store separately.