Overview
The classic pear-shaped household bulb, rebuilt with LEDs. The frosted cover gives a soft, even light with no visible LED points, and the warm white colour matches the incandescent and halogen lamps it replaces. The lamp lights instantly at full brightness and runs cool to the touch compared with an old filament bulb.
The 6 W lamp gives around 470 lumens, about the same as a 40 W incandescent bulb. The 9 W lamp gives around 806 lumens, about the same as a 60 W bulb. Both last around 15,000 hours, which is roughly fifteen times as long as the bulbs they replace.
Where to use them
GLS lamps fit most everyday light fittings with a standard cap.
- Pendants, table lamps and ceiling fittings
- Rental properties and student accommodation
- Hotel rooms, corridors and communal areas
- Offices, staff rooms and welfare units
- Maintenance stock for multi-site estates
Choosing cap and power
Check the cap on the lamp you are replacing. E27 is the large screw cap, common on table lamps and fittings from mainland Europe. B22 is the bayonet cap with two side pins, still the most common cap in UK pendants. The two are not interchangeable, so stocking both is common for maintenance teams.
Choose 6 W where a gentle light is wanted, such as bedside lamps, corridors and stairwells. Choose 9 W for main room lighting, kitchens and work areas. Check that the fitting is open or ventilated; LED lamps last longest when their heat can escape.
Design and construction
Inside the frosted polycarbonate cover sits an LED board on an aluminium heat sink, with a small driver in the neck of the lamp. Polycarbonate does not shatter like glass, which is useful in communal areas and when lamps are changed from a ladder. The lamp contains no mercury and no lead.
The driver is designed to keep the output steady across normal supply variations, and the lamp can be switched on and off thousands of times without shortening its life.
Use and care
Switch off and let the old lamp cool before removing it. Fit the new lamp firmly but do not overtighten a screw cap. These lamps are not dimmable; on a dimmer circuit they may flicker or buzz, so use them only on standard switches.
Dispose of old LED lamps through a waste electrical collection point, not with general waste.
- Not suitable for fully enclosed fittings with no ventilation
- Suitable for indoor use in dry locations
- Keep a few spares of each cap on every site
Packaging and ordering
Lamps are sold in packs of 10, each lamp in its own small carton inside an outer box, so they store neatly and individual lamps can be issued to site. Facilities teams can mix caps and wattages in one order and save the list for regular restocking. Trade tier prices apply to larger quantities.
Demo product: invented for the Cartenvo B2B demo store.