Manufacturer: Rotalign

Deep groove ball bearing 6202-2RS

Sealed deep groove ball bearing 6202-2RS with rubber seals on both sides and grease for life. Made to ISO dimensions for motors, pumps, gearboxes, castors, pulleys and machine spares, where it fits any bearing of the same code without changes.
SKU: RA-62022RS
In stock
Availability: In stock
Price
$4.35

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $4.13
50–199 $3.92
200+ $3.70

Fits these machines

Description

Overview

Deep groove ball bearings are the most widely used bearings in machinery. They carry radial loads and moderate axial loads in both directions, run at high speed and need no maintenance once fitted. The 2RS version has a rubber contact seal on each side that keeps grease in and dirt and water out.

This range covers the small 6000 and 6200 series sizes used in electric motors, pumps, cleaning machines, power tools, wheels and conveyors. All sizes follow ISO dimensions, so they replace any bearing with the same code.

Reading the code

The bearing code tells you its size. The first digit is the type: 6 is a deep groove ball bearing. The second is the series: 0 is the light, narrow series and 2 the slightly heavier one. The last two digits give the bore: 00 is 10 mm, 01 is 12 mm, 02 is 15 mm, 03 is 17 mm and 04 is 20 mm. 2RS means rubber seals on both sides.

  • 6000 series: compact, lighter loads, higher speeds
  • 6200 series: wider, higher load ratings
  • 2RS: sealed both sides, greased for life
  • Same code from any maker: same dimensions

Design and construction

Rings and balls are through-hardened chrome steel, ground and honed for quiet running. A pressed steel cage spaces the balls evenly. The nitrile seals run lightly on the inner ring, giving good protection against dust and splashes, and the bearing is filled with a general-purpose lithium grease for its whole life.

Internal clearance is normal (CN), which suits standard shaft and housing fits at normal operating temperatures.

Fitting

Press bearings on and off with a fitting sleeve that pushes only on the ring being fitted: the inner ring onto a shaft, the outer ring into a housing. Never hammer on the seals or push through the balls, as this dents the raceways and the bearing will be noisy from the start.

Make sure the shaft and housing are clean, round and within tolerance. A worn shaft or housing is a common reason why new bearings fail early.

  • Use a fitting sleeve or a bearing press
  • Don't wash sealed bearings in solvent
  • Don't heat sealed bearings above 80 °C to fit them
  • Replace bearings on a shaft as a pair

Ordering and stock

Bearings are packed singly in a printed box with the code, so they are easy to find in a stores drawer. Workshops and maintenance teams often hold a few of each common size, and trade accounts can reorder by code with quick order or a saved list. Keep bearings in their packaging until fitting to keep them clean.

When replacing a bearing, order a new shaft seal of the matching size at the same time. A worn seal lets in the dirt that ruined the old bearing.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type Ball bearing
Part code 6202-2RS
Bore (mm) 15
Outside diameter (mm) 35
Width (mm) 11
General
Brand Rotalign
Product type Deep groove ball bearing, sealed
Application Motors, pumps, gearboxes, wheels and machine spares
Country of manufacture Slovakia
Warranty 12 months against manufacturing defects
Bearing series 6200
Performance
Dynamic load rating (kN) 7.65
Static load rating (kN) 3.75
Limiting speed (rpm) 15,000
Internal clearance CN (normal)
Tolerance class ISO P0 (normal)
Operating temperature (°C) -20 to +100
Dimensions and weight
Net weight (kg) 0.045
Packed weight (kg) 0.053
Materials and construction
Ring and ball material Through-hardened chrome steel (100Cr6)
Cage Pressed steel
Seals Nitrile rubber (NBR) contact seals, both sides
Lubrication Lithium grease, filled for life
Compliance and safety
Standards ISO 15, ISO 492, ISO 281
RoHS compliant Yes
REACH compliant Yes
Packaging and ordering
Pack quantity 1 bearing
Packaging Printed box
Barcode type EAN-13
Shelf life 5 years in original packaging
Storage temperature (°C) +5 to +30

FAQs

Will this bearing replace one from another maker?

Yes, if the code matches. Bearing codes such as 6204 follow ISO dimensions, so bore, outside diameter and width are the same from every maker. Suffixes for seals and clearance can differ, so check that 2RS sealed and normal clearance suit your application.

What is the difference between 2RS and ZZ?

2RS bearings have rubber contact seals, which keep out dust and water better. ZZ bearings have metal shields that don't touch the inner ring, so they run with less friction at very high speeds but protect less against water. This range is 2RS.

Do sealed bearings need greasing?

No. They are filled with grease for life and can't be regreased. Don't wash them in solvent, which removes the grease past the seals.

How do I measure a bearing without a code?

Measure the bore, the outside diameter and the width with a vernier caliper, in millimetres, and compare them with the dimensions in the specifications on each product.

Why did my new bearing fail quickly?

The most common causes are damage during fitting, such as hammering on the outer ring when fitting to a shaft, a worn shaft or housing, misalignment, or contamination. Fit with a sleeve on the correct ring and check the shaft and housing first.

Do you sell these in boxes for workshop stock?

Each bearing is packed singly so it stays clean until fitting. Order the quantity you need; trade accounts can save common sizes to a list and reorder them quickly.