Manufacturer: Shieldwell

Cut-resistant gloves, level B

Cut-resistant work gloves rated level B to EN 388, made from a seamless HPPE knit with a thin polyurethane palm coating. They keep good dexterity and a firm grip for handling sheet metal, glass, blades and other sharp-edged parts, and they can be washed.
SKU: SW-CGB
Availability: Please select required attribute(s)
*
Price
$3.20

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $3.04
50–199 $2.88
200+ $2.72

Description

Product overview

These gloves combine a seamless high-performance polyethylene (HPPE) knit with a thin polyurethane coating on the palm and fingers. The knit resists cuts from sharp edges while staying light and flexible; the coating adds grip without making the glove stiff.

The back of the hand is left uncoated so the glove breathes, which keeps hands cooler on long shifts.

Choosing the cut level

EN 388 rates cut resistance with the ISO 13997 test as a letter from A to F. Each letter stands for the force in newtons a blade needs to cut through the material. Choose the level from your risk assessment, not the highest number available: higher levels use heavier yarns and give a little less touch.

Level B suits general assembly and handling of light parts. Level C is a good all-round choice for sheet metal, HVAC ductwork and packaging lines. Level D suits glass handling, metal stamping and recycling. Level F is for the sharpest work, such as blade changing, sheet glass and fabrication with freshly cut edges.

  • Level B: at least 5 N
  • Level C: at least 10 N
  • Level D: at least 15 N
  • Level F: at least 30 N

Where to use them

Typical users include fabricators, glaziers, HVAC and ductwork installers, warehouse teams opening cartons with knives, and maintenance staff changing blades or handling machined parts. The PU coating works best in dry or lightly oily conditions.

Because the coating is thin, you can still pick up small screws, read labels and use a touchscreen without taking the gloves off. That matters on picking lines and assembly benches, where people who remove their gloves for fiddly tasks often forget to put them back on.

  • Sheet metal and ductwork
  • Glass and glazing
  • Metal stamping and pressing
  • Packaging lines and carton opening
  • Waste sorting and recycling

Fit and sizing

Sizes run from 7 (small) to 10 (extra large). A close fit matters with cut gloves: loose fingertips reduce control of the part you are holding. Measure around the palm below the knuckles: about 18 cm is a size 7, 20 cm a size 8, 22 cm a size 9 and 24 cm a size 10.

Never wear any gloves near rotating machinery such as drills, lathes or saws, where a glove can be drawn in.

Care and replacement

The gloves can be washed at 40 °C with a mild detergent and air dried. Do not tumble dry, bleach or iron them, as heat and bleach weaken HPPE fibres. Check them before each shift and replace them if the coating is worn through, the knit is cut or the cuff has lost its elasticity.

Cut resistance protects against slicing edges. It does not stop puncture from needles or thin points, and no glove is cut-proof.

Packs and ordering

Gloves are sold in pairs and in packs of 12 pairs of one size. Many sites colour-code levels by area; the quick order form lets you order several levels and sizes in one basket, and trade accounts see their tier prices on pack quantities.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type Cut resistant
Standard EN 388
Grade B
General
Brand Shieldwell
Product type Cut-resistant work glove
Application Sheet metal, glass, blades, assembly
Country of manufacture Vietnam
Sizes available 7, 8, 9, 10
Performance
EN 388 performance code 4X42B
Abrasion resistance (level) 4
Tear resistance (level) 4
Puncture resistance (level) 2
Cut resistance ISO 13997 (N) 6
Grip conditions Dry and lightly oily
Washable Yes, up to 40 °C
Dimensions and weight
Glove length (mm) 220 to 260 depending on size
Net weight (kg) 0.03
Materials and construction
Liner material HPPE and polyester
Liner gauge 15
Coating Polyurethane, palm and fingertips
Cuff Knitted elastic
Touchscreen compatible Yes
Compliance and safety
Standards EN 388:2016+A1:2018, EN ISO 21420
PPE category Category II
CE / UKCA marked Yes
Packaging and ordering
Pack quantity 1 pair; packs of 12 pairs
Barcode type EAN-13

Documents

FAQs

Which cut level do I need?

Use your risk assessment. Level B or C suits assembly and general handling, level D suits glass and metal stamping, and level F is for the sharpest edges such as blades and freshly cut sheet. Higher levels give more protection but slightly less touch.

What does the EN 388 code on the glove mean?

The code lists abrasion, coup cut, tear and puncture results, then the ISO 13997 cut letter (A to F). An X means that test was not applicable or not performed, which is normal for the coup test on glass-fibre yarns.

Are the gloves cut-proof?

No glove is cut-proof. These reduce the risk of cuts from sharp edges, but a hard enough or repeated stroke can still cut through. They also give only limited puncture protection against needles and fine points.

Can I wash them?

Yes. Wash at up to 40 °C with a mild detergent and let them air dry. Avoid bleach, tumble drying and high heat, which weaken the fibres and reduce cut resistance.

Can I use a touchscreen while wearing them?

Yes, the PU coating lets you use most phone and tablet screens, which helps when scanning or picking orders. Very thick protective covers on devices can reduce the response.

Can I mix sizes and levels in one order?

Yes. Add each size and level you need from the product page or the quick order form. Packs of 12 pairs are packed by size, and trade accounts see their tier prices on pack quantities.