Manufacturer: Peakguard

Safety helmet, Green

Green vented safety helmet to EN 397, with an ABS shell, a six-point textile harness and a wheel ratchet for quick, one-handed adjustment. Light and well balanced for all-day wear on construction sites, with slots that take ear defenders, visors and lamps.
SKU: PG-SHGREEN
In stock
Availability: In stock
Price
$3.60

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $3.42
50–199 $3.24
200+ $3.06

Description

Product overview

This is a full-brim-peak industrial safety helmet for construction, civil engineering, utilities and maintenance work. The ABS shell spreads the force of falling objects, and the six-point harness keeps a gap between shell and head so the energy of an impact is absorbed before it reaches the wearer.

Vents along the crown let warm air escape, which makes a real difference on summer sites and in plant rooms. The helmet weighs about 360 g, light enough that it does not drag on the neck through a long shift.

Choosing a colour

All six colours share the same shell, harness and rating. Colour is used on many sites to show roles at a glance, so check the scheme your client or principal contractor uses. A common pattern is shown below, but it is a convention, not a rule.

  • White: managers, supervisors and engineers
  • Yellow: general operatives and labourers
  • Blue: visitors, technical advisers and some trades
  • Orange: slingers, signallers and banksmen
  • Green: safety officers and new starters
  • Red: fire marshals and first aiders

Design and construction

The harness has six textile straps clipped into the shell, a replaceable foam-backed sweatband and a wheel ratchet at the back that adjusts from 53 to 63 cm head size, even while wearing gloves. A chinstrap with four anchor points can be added for work at height, where the helmet must stay on during a fall.

Standard 30 mm accessory slots on each side take clip-on ear defenders and visor carriers, and four clips on the shell hold a head torch strap. A rain gutter round the brim channels water away from the face and neck.

Fit and use

Set the harness height so the helmet sits level, about two fingers above the eyebrows, then tighten the ratchet until the helmet stays in place when you nod. Never wear a cap or hood under the harness, as it changes how the helmet sits and absorbs impact.

The helmet also meets the optional EN 397 requirements for very low temperature (-30 °C) and lateral deformation (LD), and for 440 V AC electrical insulation for brief accidental contact.

Care and replacement

Clean the shell with warm soapy water. Do not paint the shell, apply solvent-based stickers or store the helmet on a vehicle dashboard, since solvents and sunlight weaken ABS. Replace the sweatband when it becomes worn or unhygienic.

Replace the helmet after any significant impact, even if no damage is visible, and in any case about three years after first issue or five years from the date moulded inside the shell. Replace it sooner if the shell is cracked, chalky or faded.

Ordering and branding

Helmets are sold singly and in boxes of 20 of one colour. Trade accounts see their tier prices on boxes, and quick order lets you mix colours for supervisors, operatives and visitors in one order. Ask your account manager about printed company logos.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Type Safety helmet
Colour Green
Standard EN 397
General
Brand Peakguard
Product type Industrial safety helmet
Application Construction, civil engineering, utilities, maintenance
Country of manufacture United Kingdom
Warranty 1 year against manufacturing defects
Performance
Head size range (cm) 53 to 63
Optional EN 397 markings -30 °C, LD, 440 V AC
Ventilation Vented crown
Operating temperature (°C) -30 to 50
Dimensions and weight
Net weight (kg) 0.36
Dimensions (L × W × H, mm) 290 × 225 × 160
Materials and construction
Shell material ABS, UV stabilised
Harness 6-point textile
Adjustment Wheel ratchet
Sweatband Foam-backed, replaceable
Accessory slots 30 mm, both sides
Lamp clips 4
Chinstrap Optional, 4-point
Compliance and safety
Standards EN 397:2012+A1:2012, EN 50365
PPE category Category II
CE / UKCA marked Yes
Service life 3 years from issue, 5 years from manufacture
Packaging and ordering
Pack quantity 1; boxes of 20
Storage temperature (°C) -10 to 40, out of sunlight
Barcode type EAN-13

FAQs

How long does a safety helmet last?

Replace it about three years after first issue, or five years from the date moulded inside the shell, whichever comes first. Replace it straight away after any significant impact, or if the shell is cracked, faded or chalky.

What do the helmet colours mean?

There is no single legal colour code. Many sites use white for managers, yellow for operatives, blue for visitors and green for safety staff, but always follow your client's or principal contractor's scheme.

Can I fit ear defenders and a visor?

Yes. The 30 mm slots on each side take standard clip-on ear defenders and visor carriers. Use accessories designed for slot mounting so the helmet's protection is not affected.

Is a chinstrap included?

A chinstrap is an optional extra. It is strongly recommended for work at height, scaffolding and in windy conditions, where a helmet can fall off.

Can I put stickers on the helmet?

Use only stickers with an adhesive approved for ABS helmets. Solvent-based paints, markers and adhesives can weaken the shell without showing any visible damage.

Can I order helmets with our company logo?

Yes, printed logos are available on box quantities. Ask your account manager for details; trade accounts see their tier prices on plain boxes in the shop.