Product overview
The Voltcrest 8.0 kVA open-frame generator is made for building sites, farms and outdoor jobs where power tools need a reliable supply. A full steel roll cage protects the engine and alternator from knocks, and every outlet is protected by a residual current device, so it is ready for site use straight from the box.
Automatic voltage regulation keeps the output steady as loads switch on and off. That protects motors and gives drills, saws, mixers and floodlights the voltage they are designed for.
Key features
- Automatic voltage regulation
- RCD-protected 10 A and 15 A outlets
- Fuel gauge and low-oil shutdown
- Wheel kit on 5.5 kVA and up
Where to use it
Choose an open-frame generator for heavy tools and rough conditions. For laptops and sensitive electronics, an inverter generator is the better choice.
- Builders running saws, breakers, mixers and drills
- Fencing and landscaping crews away from a supply
- Farms and smallholdings for pumps, welders and lights
- Temporary lighting and heating for site cabins
- Back-up power for workshops through a changeover switch
Design and construction
A single-cylinder overhead-valve petrol engine drives a brushless alternator at 3,000 rpm. The frame is welded 25 mm steel tube, powder coated against rust, with rubber anti-vibration mounts under the engine. The large steel fuel tank has a gauge on top and a wide filler with a strainer.
This model has electric start. The 5.5 kVA and 8.0 kVA models come with a wheel kit and folding handles, so one person can move them around the site. The control panel carries the outlets, an hour meter, a voltmeter and the circuit breakers.
Choosing the right size
Add up the running power of the tools you will use at the same time, then check the largest motor's start-up load. Angle grinders, saws and compressors can draw two to three times their rated power for a moment as they start.
- 3.0 kVA: one heavy tool, lights and chargers
- 5.5 kVA: a breaker or saw with lights and a small compressor
- 8.0 kVA: several trades at once or a large compressor
- Allow about 20% headroom so the engine is not run flat out
Use and care
Run the generator outdoors only, on level ground and well away from openings into buildings. Check the oil before every start; the low-oil shutdown stops the engine if the level drops, but it should never be relied on. Turn the loads off before stopping the engine, and let it cool before refuelling.
Change the oil after the first 20 hours, then every 100 hours. Clean the foam air filter every 50 hours on dusty sites, and replace the spark plug once a year. Test the RCDs with the test buttons at the start of each week.
Packaging and ordering
The generator ships on a pallet without oil or fuel, with a spark plug spanner, an earth stake and the manual. Electric-start models include the battery, which is charged before dispatch. Account customers can order several units with quick order and see their tier prices before checking out.
Demo product: invented for the Cartenvo B2B demo store.