Manufacturer: Voltaris

Lever connector 5-way, pack of 50

Voltaris 5-way lever connectors in packs of 50, for joining solid, stranded and fine-stranded conductors from 0.2 to 4 mm² without tools. Lift the lever, insert the stripped wire and close it; the clear housing lets you check every conductor is fully home, and each joint can be reopened.
SKU: VT-LC5
In stock
Availability: In stock
Price
$23.50

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $22.32
50–199 $21.15
200+ $19.98

Description

Overview

Lever connectors make a secure, maintenance-free joint between conductors in seconds. Each way has its own grey lever and spring clamp, so you can mix solid, stranded and fine-stranded conductors of different sizes in the same connector. There are no screws to tighten and nothing to come loose when the joint warms and cools.

The transparent window over each clamp shows the stripped conductor, so you and an inspector can see that it is fully inserted. A small test port above each way takes a standard meter probe, which saves opening the joint during fault finding.

Because the spring clamp keeps a constant pressure on the conductor, the joint does not need retightening at periodic inspection. That makes lever connectors a practical replacement for screw terminal strips in many places where joints are hard to reach once the ceiling or panel is closed.

Where to use them

They suit most low-voltage joints inside an enclosure, junction box or luminaire.

  • Connecting light fittings to fixed wiring
  • Joints in maintenance-free junction boxes
  • Joining flexible tails to solid cable
  • Extending circuits during refurbishment
  • Control panels and small appliances

Choosing the number of ways

Count the conductors that need to meet at the joint and pick a connector with at least that many ways. The 2-way connector joins one conductor to another, for example a fitting tail to a supply core. The 3-way suits a simple loop or a branch. The 5-way gathers several conductors at one point, which is common for neutrals and earths at a ceiling rose or in a junction box.

Put only one conductor in each way. Spare ways can be left empty, so many installers stock the 3-way and 5-way and use them for most joints. Keeping all three sizes in the van means a joint never has to be made with a connector that is too small.

Installation and use

Strip each conductor to 11 mm; the strip gauge is moulded on the side of the housing. Lift the lever fully, push the conductor in until it stops, then press the lever down until it clicks. A gentle pull confirms the clamp has gripped. Fine-stranded conductors go in without ferrules, but a ferrule makes insertion easier if the strands are very fine.

Mount the connectors inside an enclosure that meets the wiring regulations, with cables secured so no strain reaches the joint. To reopen a joint, lift the lever and withdraw the conductor; the connector can be reused.

  • Check the conductor size is within the range for the connector
  • Never twist conductors together before inserting them
  • Isolate the circuit and prove it dead before working on joints

Compliance and packaging

The connectors are tested to EN 60998-2-2 for screwless clamping units and are rated 450 V, 32 A. The housing is self-extinguishing. They come in a resealable tub of 50 that fits in a van stock box, and trade accounts can reorder them in bulk through quick order.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Ways 5
Type Lever connector
Colour Grey
General
Brand Voltaris
Product type Reusable lever splicing connector
Application Joining conductors in boxes, fittings and panels
Country of manufacture Germany
Warranty 12 months against manufacturing defects
Performance
Operating temperature (°C) -5 to +85
Reusable Yes
Test port Yes, for a 2 mm meter probe
Electrical
Rated voltage (V) 450
Rated current (A) 32
Conductor range, solid and stranded (mm²) 0.2 to 4
Conductor range, fine-stranded (mm²) 0.14 to 4
Conductors per way 1
Dimensions and weight
Strip length (mm) 11
Dimensions (L × W × H, mm) 20 × 29 × 8
Net weight (kg) 0.11
Packed weight (kg) 0.17
Materials and construction
Housing material Polycarbonate with clear window
Clamp material Stainless steel spring, tinned copper busbar
Compliance and safety
Standards EN 60998-1, EN 60998-2-2
Flammability rating UL 94 V2
CE / UKCA marked Yes
RoHS compliant Yes
Packaging and ordering
Pack quantity 50
Packaging Resealable plastic tub
Barcode type EAN-13

FAQs

Can I use lever connectors in a ceiling void without access?

Lever connectors can be used for joints that are inaccessible only when they are fitted inside an enclosure or junction box marked as maintenance-free. Otherwise keep the joint accessible for inspection, as BS 7671 requires.

Can I mix solid and flexible conductors in one connector?

Yes. Each way has its own clamp, so a solid core can go in one way and a fine-stranded flexible tail in another. Each conductor must be within the size range for the connector.

Do I need ferrules on flexible cable?

No, fine-stranded conductors can be inserted directly with the lever open. A ferrule can help when the strands are very fine or splayed, and it keeps the joint neat.

How do I know the conductor is fully inserted?

You should see the bare conductor through the clear window right up to the end stop, with no copper visible outside the housing. Close the lever and give the conductor a gentle pull to confirm the grip.

Can the connectors be reused?

Yes. Lift the lever, withdraw the conductor and the clamp is ready to use again. Replace any connector with a cracked housing or a lever that no longer locks firmly.

Can I buy mixed packs?

Each tub holds 50 connectors of one size. Add the 2-way, 3-way and 5-way tubs to your basket together, or save them as a list for quick reordering.