Manufacturer: Peakguard

Hi-vis waterproof jacket, Orange

Orange hi-vis waterproof jacket to EN ISO 20471 class 3, with taped seams, a breathable coating and a hood that rolls away into the collar. Built for roadside, rail and site work in wet weather, with enough room for a fleece underneath and pockets that take a phone and a notebook.
SKU: PG-HJORANGE
Availability: Please select required attribute(s)
*
Price
$19.50

PRICE BREAKS - The more you buy, the more you save

Quantity Unit price
10–49 $18.52
50–199 $17.55
200+ $16.58

Description

Product overview

This jacket keeps people visible and dry when the weather turns. The fluorescent outer fabric and two bands of reflective tape round the body and arms give class 3 visibility on their own, the highest class in EN ISO 20471, without needing hi-vis trousers.

The outer fabric is polyester with a polyurethane coating, and every seam is taped so rain cannot creep through the stitching. A two-way zip under a storm flap with press studs closes the front.

Where to use it

Class 3 is the level most often required for work on or beside roads, on the railway, at airports and in large yards with lorries and plant moving at speed. It is also the safest choice for traffic marshals and anyone working at night.

  • Highways and street works
  • Rail trackside and stations
  • Airside and port operations
  • Utility and civil engineering crews
  • Night shifts in yards and depots

Design and construction

The coating is breathable, so sweat vapour can escape during physical work instead of condensing inside. A mesh lining helps air move and keeps the coated layer off your skin. The hood has a drawcord and a peak, and it rolls away into the zipped collar when not needed.

The jacket has two lower pockets with flaps, a chest pocket for a phone, an inside pocket for documents and an ID badge holder. Cuffs close with hook-and-loop tabs to keep rain out of the sleeves when you reach up.

The back panel is plain and suitable for a printed company name or logo, as long as the print does not cover the reflective tape.

Choosing the right size

Sizes run from M to XXL. The jacket is cut to fit over a fleece or a body warmer, so most people take their usual size. If the wearer will add a thick insulated layer underneath in winter, go up one size.

Check that the sleeves still cover the wrists when the arms are raised: a sleeve that rides up exposes reflective area and lets rain in.

Care and replacement

Wash at up to 40 °C on a gentle cycle with a non-biological detergent and no fabric softener. Hang to dry; do not tumble dry, iron or dry clean the jacket, as heat damages the coating and the reflective tape.

Replace the jacket when the colour fades, the tape cracks or peels, or the coating starts to let water through at the shoulders. The reflective tape keeps its rating for at least 25 washes.

Ordering for crews

Jackets are sold singly and in packs of 5 of one size and colour. Trade accounts see their tier prices on packs, and the quick order form makes it easy to kit out a whole crew with mixed sizes in one basket. Pair them with matching hi-vis trousers for full-body visibility.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Colour Orange
Standard EN ISO 20471 class 3
General
Brand Peakguard
Product type Hi-vis waterproof jacket
Application Roadside, rail, airside and site work in wet weather
Country of manufacture Bangladesh
Sizes available M, L, XL, XXL
Performance
Visibility class Class 3
Waterproof rating (EN 343 class) Class 3
Breathability (EN 343 class) Class 1
Hydrostatic head (mm) 8000
Reflective tape width (mm) 50
Wash durability 25 washes at 40 °C
Dimensions and weight
Net weight (kg) 0.85
Back length (mm) 760 to 820 depending on size
Materials and construction
Fabric 300D polyester Oxford, PU coated
Lining Polyester mesh
Seams Fully taped
Closure Two-way zip with storm flap and press studs
Hood Concealed in collar, drawcord and peak
Pockets 2 lower, 1 chest, 1 inside, ID badge holder
Compliance and safety
Standards EN ISO 20471:2013+A1:2016, EN 343:2019
PPE category Category II
CE / UKCA marked Yes
Rail approved (RIS-3279-TOM) Yes
Packaging and ordering
Pack quantity 1; packs of 5
Care instructions Wash at 40 °C, no tumble dry, no bleach, no iron
Barcode type EAN-13

FAQs

Does the jacket meet class 3 on its own?

Yes. The jacket has enough fluorescent and reflective area to meet class 3 without trousers. Adding hi-vis trousers gives better all-round visibility, especially from low angles.

Is it fully waterproof?

The fabric is coated and every seam is taped, and the jacket meets EN 343 class 3 for water penetration. As with any jacket, rain can get in at the neck and cuffs if the hood and tabs are left open.

Will it be too hot in summer?

The coating is breathable and the mesh lining helps air move, but a waterproof jacket is always warmer than a vest. In dry, warm weather many crews switch to a class 2 vest, if the site rules allow it.

Can we have our logo printed on the back?

Yes, the back panel is suitable for printing. The print must not cover the reflective tape. Ask your account manager about a printed order.

How should I wash it?

Wash at up to 40 °C on a gentle cycle, without fabric softener, and hang it to dry. Do not tumble dry, iron or dry clean, as heat damages the coating and the tape.

Which colour do I need for rail work?

Rail work usually calls for orange, and the orange jacket is made to the rail industry standard. Yellow is the common choice for highways and general sites; always check your client's requirement.