Overview
A2 stainless steel, also known as 304 or 18/8, is the standard choice where a fastener must stay free of rust without any coating. These bolts are cold formed with a full hexagon head and a metric coarse thread. They are made to property class A2-70, which gives a strength close to a grade 8.8 carbon steel bolt in the smaller sizes.
The finish is plain stainless, so there is no plating to chip or wear off. The bolt looks the same after years outside as on the day it was fitted, which matters on visible work such as balustrades and shopfronts. It also means no zinc flakes or white rust can fall into food, drink or packaging lines below.
Sold in packs of 25 bolts.
Where to use it
Choose A2 stainless wherever water, condensation or cleaning chemicals would attack a zinc plated bolt:
- External brackets, gates, fencing and handrails
- Signage, canopies and cladding support rails
- Food, drink and dairy plant that is washed down
- Boat trailers, pumping stations and drainage equipment
- Air handling units and roof-mounted plant
Design and construction
Each head carries the A2-70 grade mark and the maker's mark. The thread is rolled, not cut, which gives a smooth, strong profile. Shorter bolts are threaded up to the head; on longer lengths a plain shank sits in the joint for better shear strength.
Stainless steel is slightly magnetic after cold working. This is normal and does not affect corrosion resistance.
Choosing the right size
Size the length so the bolt passes through the joint, both washers and a full nut, with two threads showing. Pick the diameter for the hole and the load: the technical tab lists minimum tensile loads for each size.
For seawater splash zones, swimming pools or chloride-rich areas, A4 (316) stainless is the safer grade. Ask our team if you are unsure which grade your project needs.
Installation and care
Stainless threads can gall, or cold weld, when tightened quickly or under heavy load. Avoid this by using a stainless nut, applying a little anti-seize compound and tightening steadily by hand or at low speed rather than with an impact wrench. Keep stainless fasteners apart from carbon steel tools and swarf, which can leave rust spots on the surface.
Where a stainless bolt passes through aluminium or galvanised steel in wet conditions, use nylon washers or sleeves to limit galvanic corrosion. Clean off any concrete, cement or grinding dust after fitting, and wipe down with water now and then in dirty or salty air to keep the surface bright.
Packaging and ordering
Bolts are packed in labelled bags of 25 with the size, grade and barcode printed on the label. Matching stainless nuts and washers make a complete corrosion-resistant joint, and keeping all three parts in the same grade avoids mixed-metal staining later. Stores teams often hold stainless stock in separate bins so it is never mixed up with plated parts. Trade customers can order mixed sizes through quick order and see their account pricing in the basket.
Demo product: invented for the Cartenvo B2B demo store.