Manufacturer: Voltaris

Rotary isolator 32 A, IP65

Voltaris 32 A rotary isolator in a grey IP65 enclosure, for switching off and locking out air conditioning units, pumps, motors and outdoor equipment. The handle locks in the off position with up to three padlocks, so maintenance can be carried out safely.
SKU: VT-RI32
In stock
Availability: In stock
Price
$25.00

Description

Overview

A rotary isolator gives a clear, local means of disconnecting equipment from its supply. This one has a three-pole switch inside a sealed polycarbonate enclosure, with a large red handle on a yellow plate that is easy to see and operate with gloves on. The handle shows a plain O for off and I for on.

In the off position the handle can be locked with up to three padlocks, so each person working on the equipment can fit their own lock. The lid cannot be opened while the switch is on, which stops anyone reaching live terminals.

Where to use it

The IP65 enclosure is sealed against dust and water jets, so the isolator can be mounted outdoors or in wash-down areas as well as in plant rooms.

  • Air conditioning and heat pump outdoor units
  • Pumps, fans and compressors
  • Machine tools and conveyors in workshops
  • Electric vehicle charge points and outdoor sockets
  • Commercial kitchen and laundry equipment

Design and construction

The switch mechanism has a quick make and quick break action, so the contact speed does not depend on how fast the handle is turned. That reduces arcing and contact wear when switching motor loads. The enclosure is made from UV-stabilised polycarbonate, which resists impact and does not become brittle in sunlight.

Knock-outs for M20 and M25 glands are moulded in the top and bottom of the box, and the lid is held by captive screws with a full-length gasket.

  • Three-pole switch, usable on single-phase or three-phase supplies
  • Separate earth terminal in the enclosure
  • Wall-mounting holes outside the sealed area

Choosing the right rating

Choose an isolator with a current rating at least equal to the rating of the protective device upstream. The 20 A model suits most domestic air conditioning units and small pumps. The 32 A model suits larger heat pumps, charge points and motors up to about 11 kW. The 63 A model suits sub-main supplies and heavy plant. For motor circuits, check the AC-23A power rating in the specifications.

Installation and care

Mount the isolator within sight of the equipment it controls. Use glands of the correct size and seal any unused knock-outs so the IP65 rating is kept. Fit drainage at the lowest point only if the manufacturer of the equipment requires it.

Operate the isolator from time to time so the contacts stay clean, and check the gasket and glands during routine maintenance. Replace the isolator if the enclosure is cracked, the handle is loose or there are signs of overheating at the terminals.

Compliance and ordering

The isolator is made to BS EN 60947-3, the standard for switch disconnectors, and is CE and UKCA marked. Each one comes boxed with fixing screws and a set of labels for identifying the equipment it controls.

Contractors fitting several units on one project, such as a row of air conditioning condensers, can add the quantity to a quick order or send the full list through the quote basket. Trade tier prices apply automatically, and the matching armoured cable and circuit breakers can go on the same order.

Demo product: invented for the Cartenvo B2B demo store.

Technical specifications

Specifications

Products specifications

Attribute name Attribute value
Finish Grey
Type Isolator
Rating (A) 32
IP rating IP65
General
Brand Voltaris
Product type Rotary isolator in enclosure
Application Local isolation of motors, pumps and outdoor units
Country of manufacture Italy
Warranty 2 years
Performance
Operating temperature (°C) -25 to +40
Mechanical life (operations) 30,000
Lockable Off position, up to 3 padlocks (8 mm shackle)
Electrical
Rated voltage (V) 400 AC
Poles 3
Motor rating, AC-23A at 400 V (kW) 11
Terminal capacity (mm²) 2.5 to 10
Earth terminal Yes, in enclosure
Dimensions and weight
Dimensions (L × W × H, mm) 120 × 100 × 95
Net weight (kg) 0.45
Materials and construction
Enclosure material UV-stabilised polycarbonate
Handle Red on yellow plate
Cable entries Knock-outs for M20 and M25
Compliance and safety
Impact rating IK08
Standards BS EN 60947-3
CE / UKCA marked Yes
RoHS compliant Yes
Packaging and ordering
Pack quantity 1, with fixing screws and labels
Barcode type EAN-13

FAQs

Can I use a three-pole isolator on a single-phase supply?

Yes. Connect line and neutral through two of the poles and leave the third unused, or use it for a control circuit if the equipment needs one. The earth goes to the separate earth terminal.

Which rating do I need for an air conditioning outdoor unit?

Match the isolator to the protective device feeding the unit. Most split systems for homes and small offices use a 16 A or 20 A circuit, so the 20 A isolator suits them. Larger systems may need the 32 A model.

Is the isolator suitable for outdoor mounting?

Yes. The enclosure is rated IP65 and made from UV-stabilised polycarbonate. Use IP-rated glands, seal unused entries and mount it with the cable entries facing down where possible.

Can it be locked off for maintenance?

Yes. The handle accepts up to three padlocks in the off position, so each person working on the equipment can fit their own lock. The lid cannot be opened while the switch is on.

Can the isolator be used to switch a motor on and off in normal use?

It can switch motor loads within its AC-23A rating, but it is meant mainly for isolation. For frequent starting and stopping, use a contactor or motor starter and keep the isolator for maintenance.

Are glands included?

No, glands are not included because the size depends on the cable. Order compression glands for armoured cable or stuffing glands for flexible cable separately.